Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Note that some noise will appear on the picture when the tape speed is changed. To operate this function correctly, the “TAPE SELECT” setting in the USER SET menu must be accurate (see page 58). Basic Operations continued Basic Operations Recording TV programmes using the Easy Timer (continued) To set the clock 1 Hold down EASY TIMER so that “DAY” appears in the display window. However, if the clock has already been set, the current setting appears. 2 Turn EASY TIMER to set the day. 3 Press EASY TIMER. MONTH indicator and “1” appear in the display window. 4 Turn and press EASY TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window. 5 Turn and press EASY TIMER to set the hour and minute. 6 When you have finished setting the time, press EASY TIMER to start the clock. Tips • To cancel a Easy Timer setting, press x STOP on the VCR while you are making the setting. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 50. • To record NTSC signals in EP mode, set the tape speed to LP. Even when timer recording is set to LP mode, NTSC signals are automatically recorded in EP mode. Notes • If eight programmes have already been set using the G-CODE system* or the TIMER PROGRAMMING menu, “FULL” appears in the display window for about five seconds. • The indicator flashes in the display window when you complete the setting in step 11 with no tape inserted. • When the time is set incorrectly, “ERROR” appears in the display window in step 11. Set the timer again from step 1. Basic Operations About the Demonstration Mode The Easy Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Easy Timer. It cancels the “FULL” notice which appears if eight programmes have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X PAUSE on the VCR while turning the EASY TIMER. “DEMO” appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Easy Timer or any other timer method after reconnecting the mains lead (see page 50). * SLV-ED929MI only Basic Operations Basic Operations Recording TV programmes using the G-CODE® system (SLV-ED929MI only) The G-CODE system is the feature that simplifies programming the VCR to make timer recordings. Just enter the G-code number listed in the TV programme guide. The date, times, and programme position of that programme are set automatically. You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. • Refer to “Index to parts and controls” for button locations. 1 G-CODE Press the G-CODE button. The G-CODE menu appears on the TV screen. G-CODE CODE ––––––––– CODE :0–9 SET : OK EXIT : MENU 2 Press the programme number buttons to enter the G-code number. CLEAR If you make a mistake, press CLEAR and re-enter the correct number. 1 2 3 4 5 6 7 8 9 0 G-CODE CODE 1234––––– CODE :0–9 SET : OK EXIT : MENU Basic Operations OK PLAY OK PLAY Press OK. The date, start and stop times and tape speed appear on the TV screen. • When using the G-CODE system for the first time, “– –” appears in the “PR” column. Therefore, set the programme position manually. SET MENU: : OK:END SELECT –– –––– –– –– – –– –: : 3 5 SA2 91 90 02 0 0 0: : –– –––– –– –– – –– –: : –– –––– –– –– ––: : –– : –– –––– –– –– ––: –– : –– –––– –– –– ––: –– – SP – – – –: EXIT PR DAY START STOP CLEAR Press M/m to select the desired programme position. • To record from other equipment connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PR” position. You will only have to do this operation once for the referred channel. The VCR will then store your setting. If the information is incorrect, press CLEAR to cancel the setting. INPUT SELECT Basic Operations OK PLAY 4 If you want to change the date and tape speed: 1 Press Other models in this manual:
Tape Players - SLV-ED225PS (584.29 kb)
Tape Players - SLV-ED323ME (584.27 kb)
Tape Players - SLV-ED323SG (584.27 kb)
Tape Players - SLV-ED825PS (584.27 kb)