Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
They are displayed when the DISPLAY mode is ON or AUTO. Display Contents INVALID TAPE! Data tapes for PC use or DVC PRO tapes has been inserted. The cassette will be ejected. LP TAPE! The user attempts to play back a tape recorded in the LP mode. This unit cannot record or play in the LP mode. NO DV SIGNAL The user attempts to record without DV signal input. Display Contents COPY INHIBIT The user attempts to record signals protected with the copy guard. REC INHIBIT The user attempts to record on a write protected cassette tape. (The rear slide is pushed to “SAVE”.) A. DUB INHIBIT (REC TAB) The user attempts to perform audio dubbing on a write protected cassette tape. (The rear slide is pushed to “SAVE”.) A. DUB INHIBIT (48K) This message is displayed when audio dubbing is attempted under the following conditions: • The AUDIO MODE item of the AUDIO/VIDEO menu is set to 48K. • The tape is recorded with a sample frequency of 48kHz. A. DUB INHIBIT (LP) The user attempts to perform audio dubbing on a tape recorded in the LP mode. A. DUB INHIBIT (BLANK) The user attempts to perform audio dubbing on a blank tape. A. DUB INHIBIT (DV) The user attempts to perform audio dubbing during DV signal input. (The INPUT SEL. switch is set to “DV”) A. DUB INHIBIT (NTSC/PAL) This message is displayed when the signal system is changed during audio dubbing (NTSC or PAL). A. DUB INHIBIT (DVCAM) The user attempts to perform audio dubbing on a DVCAM format tape. OPERATION LOCK This message is displayed when a button on the unit is pressed while the OPERATION LOCK function is engaged (ie, the OPERATION item of the SYSTEM (2/2) menu is set as “ON”). Warning display : When anomalies occur in the VTR, warning messages with error codes will be displayed. n 32K CH–1/2 SP000 mi WARNING 7001 Warning display DRUM MOTOR FA I LURE For details, please refer to page 66, “Warning Display”. 10 / 10 / 02 STANDBY -OFF 12:00:00 TCR 02:00:00:00 PREPARATION – Provided wireless remote controller – Loading the batteries Before using the wireless remote controller, please load 2 batteries (AA/R6) in. 1 Lift up the cover 2 Load in 2 batteries 3 Close the cover. of the battery (AA/R6). compartment. • Please insert the · pole in first. Battery compartment cover + - - + Memo Guide on battery replacement. When the operable distance of the remote controller is decreased, the batteries have become exhausted. Please replace them. Guide for replacement: Approx 3 months based on average usage of 1000 times a day. When replacing the batteries • Please use AA/R6 batteries. • Please use 2 new batteries. (Do not mix new and old batteries.) • Please load the batteries correctly accord- ing to the . and · signs. • Please read the precautions printed on the batteries. Precautions on the use of battery • The provided batteries are for confirmation of operation. • If the remote controller is not to be used for a long period of time, please remove the batteries from the compartment. • If the remote controller does not work as expected, please remove the batteries and reload them after 5 minutes. Note If fluid leaks from the battery, please wipe the battery compartment thoroughly. If the fluid comes into contact with your body, please rinse the affected parts with water thor- oughly. Using the wireless remote controller Using the wireless remote controller Before using the wireless remote controller, please set the REMOTE SEL. switch to “WIRELESS”. Mini PROFESSIONALSET MENIU EJECT REC PLAY PAUSE REW STOP FF DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL.REMOTE SEL. SERIAL WIRELESS9PIN LINE DV Y/C Sensor for the wireless remote controller Caution on using the wireless remote controller When more than 2 VTRs are being individually operated in the same place, please ensure that the front panel REMOTE SEL. switches of all VTRs except the one to be manipulated, are NOT set at “WIRELESS”. Operable scope of the wireless remote controller Sensor for the wireless remote controller Mini PROFESSIONALSET MENIU EJECT REC PLAY PAUSE DVCAM NTSC PAL REC INH. CH-1/3 CH-2/4 BR-DV3000 A.DUB OPERATE INPUT SEL.REMOTE SEL. MIC SERIAL WIRELESS9PIN LINE DV Y/C About 30° Not further than 6m Maximum distance to the sensor of the unit : 6m Angle : within 30° About 30° Notes • The remote controller will hardly work if there are obstructive objects between the remote control sensor of the main unit and the remote controller. • The remote controller will hardly work when sunlight or strong light shines directly on the remote control sensor of the main unit. • Do not press the buttons on the main unit and the remote controller simultaneously for this may cause malfunction. PREPARATION – Power – Connecting to the AC adapter Connect the provided AC adapter to the main unit. DV IN/OUT AUDIO VIDEOLINE Y/CCH 1/3 CH 2/4 INOUT REMOTE SERIAL9PIN NTSC/PAL NTSC PAL DC12V AC Provided power cord DC cord Screw Clamp DC IN terminal Provided AC adapter OPERATE indicator Mini PROFESSIONALDVCAM ...