Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
Table 7 HP Network Advisor 11.1.0 closed defects (continued)
Closed fixes summary
Solution
Remote VE_Port WWN is shown as missing and with a red icon under end Fixed in HP Network Advisor 11.1.0.
devices.
Fault Management – “VFID” is shown as “Chassis” for “Switch name change Fixed in HP Network Advisor 11.1.0.
event” in the master log.
There are yellow dotted lines shown between the segmented switch and
Fixed in HP Network Advisor 11.1.0.
the End Device in the re-discovered fabric.
In the Client, IFL/ISL connections are not being displayed correctly in the
Fixed in HP Network Advisor 11.1.0.
topology view when multiple circuits are added with different GigE ports
for a tunnel.
For zoning, sorting of ports is not accurate in the Hex display mode for the Fixed in HP Network Advisor 11.1.0.
user port number.
In the Client, the latest topology changes are not reflected; the yellow dotted Fixed in HP Network Advisor 11.1.0.
line is not shown when the tunnel is deleted.
In the Device Tree, on selecting an E_Port on switch1, after 1 minute focus
Fixed in HP Network Advisor 11.1.0.
changes to the same port under switch-2, and is misleading to the user.
When a user attempts to delete a logical switch the operation may fail with Fixed in HP Network Advisor 11.1.0.
the error message internal server error.
A user is unable to edit the commit rate of a second circuit after the first
Workaround prior to upgrade: Close and
circuit has been modified without closing and reopening the FCIP Tunnel
reopen the circuit dialog on different
dialog box.
circuits to perform the edit operation.
Fixed in HP Network Advisor 11.1.0.
In the Client, the Logical Switch Sequence Number is displayed incorrectly Fixed in HP Network Advisor 11.1.0.
in the Switch Properties Dialog.
In Port Fencing, Switch-level Alert was missing when a port is fenced for
Fixed in HP Network Advisor 11.1.0.
Link reset violation type.
FCIP Circuits do not come up and stay in an 'In progress' state after
Workaround prior to upgrade: Change
changing the commit rate.
commit rates on both the local and remote
ends separately through the CLI if there
are different VLAN tags at both ends.
Fixed in HP Network Advisor 11.1.0.
At times hosts are not displayed and a user will not be able to view the
Workaround prior to upgrade: Hit the
LUNs configured for a container.
refresh button in the target dialog to see
the hosts configured.
Fixed in HP Network Advisor 11.1.0.
Syslog registration fails for HP StorageWorks 4/32B SAN Switches with
Workaround prior to upgrade: Add syslog
a McDATA OUI 08:00:88
registration via the CLI.
Fixed in HP Network Advisor 11.1.0.
Encryption HAC Failover status not displayed.
Fixed in HP Network Advisor 11.1.0.
Decommissioning a LUN in an Encryption Group (EG) that is configured
Fixed in HP Network Advisor 11.1.0.
with TKLM returns an error message that is invisible to the user.
Unable to discover fabric in DCFM if IP address of any member switch is
Workaround prior to upgrade: Configure
0.0.0.0.
valid IP addresses for all switches in the
fabric.
Fixed in HP Network Advisor 11.1.0.
A user is unable to invoke the patch install dialog from DCFM 10.4.3 when Workaround prior to upgrade: Login as
logged in as a user with admin privileges.
system administrator.
Fixed in HP Network Advisor 11.1.0.
Migration and upgrades
19
...Other models in this manual:
Media Storage - HP 4400 Dual Controller Enterprise Virtual Array (366.36 kb)
Media Storage - HP StorageWorks EVA4400 Dual Controller Array (366.36 kb)
Media Storage - HP StorageWorks EVA4400 Dual Controller w/(8) 8Gb SFP/(2) 8Gb Embedded Switch (366.36 kb)
Media Storage - HP StorageWorks EVA4400 Dual Controller w/Embedded Switch (366.36 kb)