Using a Phillips screwdriver, remove the four screws in the rim. Throw away these screws. • Remove the old net-ring from the topside of the rim. Throw away the old net-ring. Assemble New Net-Ring • Pull each net loop through a ring tab, as shown. • Grasp the bottom of the net and pull down to be sure all of the loops are inserted into all of the ring tabs. Align the four holes in the ring with the four holes in the rim. Fit the new net-ring assembly into the topside of the rim. • Insert f

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

• Carefully apply the side edge of the label to the side edge of the label area on the backboard. • While rubbing the label in place, continue to peel the backing from the other half of the label. • After applying the label, rub the label firmly with a cloth to make sure the label is adhered to the backboard. • Dispose of the label backing properly. Backboard Assembly 3 1 2 Side Edge Base “T” End Plug • Place the loops at the top of the net into the grooves on the ring. • Pull each loop through

Rectangular Tab Rim Upper Post • Lean the rim against a wall for support. • Locate the pegs on each side of the rim and the grooves on the backboard. • Position the backboard with the Fisher-Price® logo facing up. • Place your foot on the base to hold it steady and slide the backboard onto the upper post at an angle, as far as it will go. Note: There should be no gap between the upper post and the backboard. • Move the assembly away from the wall. 6 4 5 Backboard Fisher-Price® Logo Peg Groove Wa

Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Consumer Information Visit us on line at Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. 2 Overhead Gym

Adult assembly is required. Requires four “C” (LR14) alkaline batteries for the mobile and two “AA” (LR6) alkaline batteries for the remote control. (Batteries not included) Di s c o v e r w h a t ’s possible™ Tool required for battery installation: Phillips screwdriver (not included). Parts 2 • A crib mobile is intended for visual stimulation and not to be grasped by a child. • Always attach by provided fastener (clamp) tightly to a crib or playpen according to the instructions. Check frequentl

Hearing-Impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. For countries outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; Great Britain: Mattel UK Ltd. Vanwall Business Park. Maidenhead SL6 4UB. Helpline: 01628 500303. Yww.servira.mattel.cpm/uk Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18

Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging. • If removable, rechargeable batteries are used, they are only to be charged under adult supervision. 4 Button Leg Hole Opening T

• Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. For countries outside the United States: CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; AUSTRALIA: Mattel Australia

Hearing-impaired consumers using TTY/TDD equipment, please call 1-800382-7470. For countries outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; Great Britain: Mattel UK Ltd. Vanwall Business Park. Maidenhead SL6 4UB. Helpline: 01628 500303. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Sen/ice 1300 135 312. New Zealand: 16-18 William Pickering Drive, Alban