Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
BATTERY POWER Insert 6 D-sized dry batteries (not supplied) and you can take your system just about anywhere. Open the battery compartment door on the back of the unit by pressing down the two tabs and pulling out the cover. Insert batteries as marked on the back. Important Battery Information • If you are not going to use your system for a month or more, be sure to remove batteries because they can leak and cause damage. • Dispose of batteries in the proper manner, according to federal, state, and local regulations. • Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. AC POWER Plug the power supply cord into the AC power jack on the back of the unit, and into an AC power outlet. CAUTIONS: 1. ONLY USE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT. REMOVE BATTERIES WHEN USING THE POWER CORD. 2. BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME. ANTENNAS The AM antenna is built in, so adjusting the position of the unit may help AM reception. The FM telescopic antenna on the back of the unit can be extended and rotated for better FM reception. GENERAL CONTROLS FUNCTION switch – Move the switch to select which part of this system you want to select – TUNER, TAPE or CD. VOLUME – Turn the volume knob to increase or decrease the volume to desired level. HBS – Press so that the HBS indicator lights. You can enjoy powerful bass sound with the Hyper-Bass Sound effect. POWER OFF – Move FUNCTION to OFF/TAPE with no cassette button pressed, to turn the unit off. USING THE RADIO TUNING IN RADIO STATIONS Move FUNCTION to TUNER to turn the radio on. • Set BAND to AM or FM. • Tune in desired station by turning the TUNING knob. • To turn off the radio, move FUNCTION to OFF/TAPE. BEAT CUT/FM MODE SWITCH • When recording an AM broadcast When recording an AM broadcast, beats may occur. If this happens, set the switch to “1” or “2.” • Changing the FM reception mode When an FM stereo broadcast is hard to receive or noisy, set the switch to “MONO.” Reception improves. To restore the stereo effect, switch to “STEREO.” USING THE TAPE PAUSE – Press to interrupt tape play or record mode. Press a second time to resume tape play or tape record mode. STOP/EJECT – Press to stop the current tape activity, or to open the cassette compartment door when no buttons are active. FF – In stop mode, press to advance the tape toward the end. (When the tape reaches the end, press STOP/EJECT to release the depressed button.) REW – In stop mode, press to rewind the tape toward the beginning. (When the tape reaches the end, press STOP/EJECT to release the depressed button.) PLAY – Press to play cassettes. REC – Press to record from the radio or CD player. PLAYING A CASSETTE TAPE 1. Move FUNCTION to OFF/TAPE. 2. Press STOP/EJECT to open the cassette compartment door. 3. Insert a cassette tape into the compartment with the exposed part of the tape facing up and the side you want to play facing toward you. 4. Close the door securely. 5. Press REW or FF to move the tape to the desired starting point. 6. Press PLAY to begin playing the tape. The cassette tape plays until it reaches the end of the side, then it automatically stops. RECORDING ON CASSETTE TAPES You can record from the radio or the CD player. For best recording, use normal bias tape. It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein. ERASE PROTECTION When you record new material, the cassette deck records over whatever is on a tape. To protect a tape from accidental erasure, break off one or both plastic tabs (one for each tape side) on the top of the cassette tape. If you decide later to record on the tape, seal the hole with a piece of cellophane tape. WARNING A little bit of slack in your tape can cause scratches on the tape, or worse yet, the tape could break. If you notice some slack in the tape, use a pencil to tighten it up before you insert it in the tape deck. TIP The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-roller and the capstan. RECORDING FROM THE RADIO 1. Insert a cassette tape into the tape deck and close the door. 2. Move FUNCTION to TUNER and select a radio station. 3. Press REC to begin recording. REC and PLAY lock down. 4. Press STOP/EJECT to end recording. 5. To turn off the radio, slide FUNCTION to OFF/TAPE. RADIO RECORDING TIPS • To temporarily pause the recording, press PAUSE on the cassette deck. Press PAUSE again to resume recording. SYNCHRONIZED RECORDING FROM A CD 1. Insert a cassette tape into the tape deck and close the door. 2. Move FUNCTION to CD. 3. Insert the CD you want to record int...
Other models in this manual:Fitness Equipment - RC-EX10B (384.77 kb)
Fitness Equipment - RC-EX10S (384.77 kb)