Votes - 3, Average rating: 3 ( )

Manafacture: JVC File size: 384.77 kb File name: Language of manual:

Other manuals for this model:

Portable Players - RC-EX10S (357.07 kb)

• Make sure the tray contains a CD. • Make sure the CD’s label is facing up. • Make sure that pause mode is not activated. • Make sure CD function is selected. • Clean the CD (as explained in “CARE AND MAINTENANCE”). • Check CD for warping, scratches, or other damage. • Check for vibration or shock that may affect the unit; move system if necessary. • Inspect the recording head and clean it if necessary. • Demagnetize recording head (as explained in “CARE AND MAINTENANCE”). System doesn’t turn on. No sound Poor radio reception CD doesn’t play. CD sound skips. Distorted or noisy recordings SKIP/SEARCH-DOWN (backward) PROGRAM STOP SKIP/SEARCH-UP (forward) REPEAT PLAY/PAUSE CARE AND MAINTENANCE CLEANING THE EXTERIOR • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth. HANDLING CDS • Do not touch the signal surfaces. Hold by the edges, or by one edge and the hole. • Do not affix labels or adhesive tape to the label surfaces. Also, do not scratch or damage the label. • Discs rotate at high speed inside the player. Do not use damaged (cracked or warped) discs. CLEANING CDS • Dirty discs can cause poor sound quality. Always keep discs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a disc becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on discs. Also, never clean discs with benzene, thinner, or other volatile solvents which may cause damage to the disc surface. TAPE CARE • Do not expose tapes to sunlight or store in hot places. High temperatures may warp the shell or damage the tape itself. • Keep cassettes in their boxes when not in use. • Cassette tapes can be erased by magnetic fields produced by magnets, electric motors, electrical transformers, and other devices. Keep tapes away from magnets and magnetic fields. CLEANING THE TAPE HEADS Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the tape. These deposits can cause incomplete erasure, muffled playback sound, and might prevent automatic stop. To clean a cassette deck, open the compartment door, press PLAY and gently clean the heads, capstan, and pinch wheel with a head cleaner. Always unplug the power cord before cleaning, and allow 30 minutes drying time after using a liquid cleaner. Clean heads after every 25 hours of use. • Demagnetize the head occasionally with a head demagnetizing cassette (available from many audio equipment stores). • Never use any metal objects on or near the tape heads. • Do not allow any cleaning material to fall into the tape assembly. REMOTE FUNCTIONS (FOR CD OPERATION ONLY) STOP PROGRAM REPEAT SEARCH-UP SEARCH-DOWN PAUSEPLAY SKIP SKIP When inserting batteries Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment on the back of the unit. TROUBLESHOOTING TIPS SPECIFICATION CD player CD capacity : 1 CD Dynamic range : 60 dB Signal-to-noise ratio : 75 dB Tuner Frequency ranges : FM 88 - 108 MHz : AM 540 - 1 600 kHz Antenna : Telescopic antenna for FM Ferrite core antenna for AM Cassette deck section Frequency response : 60 Hz - 10 000 Hz Wow and flutter : 0.15% (WRMS) General Speaker : 9 cm cone . 2 (4 .) Power output : 2 W + 2 W at 4 . (10% THD) (IEC 268-3) Output terminals : Phones . 1 (. 3.5 mm, stereo) Power supply : AC 230 V O, 50 Hz DC 9 V (“R20 (SUM-1)/D (13D)” . 6) Power consumption : 12 W (at operation), 3 W (on standby) Dimensions : 420 mm (W) . 178 mm (H) . 250 mm (D) Mass : Approx. 3.2 kg (without batteries) Accessories provided : AC power cord . 1 Remote control unit . 1 Batteries for the remote control unit (AAA (UM-4)/R03) . 2 CD PORTABLE SYSTEM RC-EX10S/RC-EX10A/RC-EX10B INSTRUCTIONS LVT1211-005A [EN] ENGLISH Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit. SAFETY PRECAUTIONS Caution –– OFF switch! Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The power cannot be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VORSICHT ! UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DEC...

Download now

Please, enter two numbers from picture: