Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 17   File size: 1 mb   Manafacture: Hotpoint  
Category: Washers
@name

Sometimes, small items (such as coins and buttons) may fall into the pre-chamber that protects the pump, situated in the lower part of the same. ! Make sure that the wash cycle has ended and unplug the appliance. To access the pre-chamber: 1. remove the cover panel (in the lower front of the washing machine), prizing it on both sides with a screwdriver. Do not force it. 5. reposition the panel, making sure the hooks are securely in place before you push it onto the appliance. Checking the w

downloaded: 9   File size: 366 kb   Manafacture: Hotpoint  
Category: Washers
@name

8). Adjust them for depth based on the position of the base molding, and, if necessary, fasten the base to the guides (fig. 9). This is how to assemble the plinth guide (fig. 8). Fasten angle P using screw R, insert plinth guide Q into the special slot and once it is in the desired position, lock it in place using angle P and screw R. Inserting the machine into the Cabinet. - Push the machine into the opening, aligning it with the cabinets (fig. 6). - Regulate the adjustable feet to raise t

downloaded: 7   File size: 316 kb   Manafacture: Hotpoint  
Category: Washers
@name

One bar indicates a reduced spin speed programme should be used. Two bars mean the clothes need a mild wash action, but can be spun and rinsed normally. Such items should not be wrung out by hand. If the tub contains a hand, wash the item on a Hand Wash programme. A triangle means that you can safely use a cold, dilute solution of bleach. A triangle with a cross over it means the item cannot be bleached. A circle inside a square means you can tumble dry the garment. The dots indicate temperature

downloaded: 4   File size: 413 kb   Manafacture: Hotpoint  
Category: Washers
@name

¦ Do not tamper with controls. Read and follow this Safety Information carefully. SAVE THESE INSTRUCTIONS 3 Operating Instructions Safety InstructionsCustomer Service Troubleshooting Tips About the washer control panels. You can locate your model number on the label on the front of the washer behind the door. Throughout this manual, features and appearance may vary from your model. Model VBSR1070 LARGE OFF OFF LOAD SIZE WASH RINSE COLD COLD WARM COLD SMALL SUPER HEAVY NORMAL LIGHT SOIL EXTRA RIN

downloaded: 7   File size: 413 kb   Manafacture: Hotpoint  
Category: Washers
@name

Wipe with damp cloth. Try not to hit surface with sharp objects. basket use a clean soft cloth dampened with liquid detergent, then rinse. (Do not use harsh or gritty cleaners.) Fill Hoses: Hoses connecting washer to faucet should be replaced every 5 years. Lint Filter: The lint filter is located under the agitator. It is self-cleaning and requires no maintenance. Moving and Storage: Ask the service technician to remove water from drain pump and hoses. Do not store the washer where it will be ex

downloaded: 11   File size: 347 kb   Manafacture: Hotpoint  
Category: Washers
@name

The packaging was designed to make it possible to mount the wooden panel onto the machine without removing it completely (see figures below). The wooden panel that covers the face of the machine must not be less than 18 mm in thickness and can be hinged on either the right or left. For the sake of practicality when using the machine, we recommend that the panel be hinged on the same side as the door for the machine itself - the left. Door Mounting Accessories (Fig. 1-2-3-4-5). B Fig. 4 - No.

downloaded: 8   File size: 413 kb   Manafacture: Hotpoint  
Category: Washers
@name

During this From the date of the full one-yearwarranty, we will also provide, free of charge, all labor and in-home service to replace original purchase the defective part. Five Years The transmission, if it should fail due to a defect in materials or workmanship. During this From the date of the additional four-year limited warranty, you will be responsible for any labor or in-home service costs. original purchase Twenty Years The washer basket, if it should fail due to a defect in materials or

downloaded: 18   File size: 357 kb   Manafacture: Hotpoint  
Category: Washers
@name

Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the Washer-dryer to inform the new owner as to its operation and features. ! Read these instructions carefully: they contain vital information on installation, use and safety. Unpacking and levelling Unpacking 1. Unpack the Washer-dryer. 2. Check whether the Washer-dryer has been damaged during transport. If this is the case, do not install it and contact your retailer. 3. Remove the 4 protecti

downloaded: 6   File size: 413 kb   Manafacture: Hotpoint  
Category: Washers
@name

Do not stop the washer during the first spin. This will cause the dispenser to empty too soon. To use, follow these steps: Make sure dispenser is securely attached Do not pour anything into the agitator if to agitator. the agitator cap or dispenser is removed. 2 Use only liquid fabric softener. Pour into dispenser, using amount recommended on package. Never pour fabric softener directly on clothes. It may stain them. The Agitator Cap or Fabric Softener Dispenser (depending on model) Cleaning the

downloaded: 10   File size: 230 kb   Manafacture: Hotpoint  
Category: Washers
@name

Allow sufficient space: 600mm width, 600m depth and 900mm height. DO NOT install in a bath or shower room. Dispose of packaging material in a safe place and remove any labels. Please read through thoroughly to ensure you understand each stage before you begin. STEP 1 STEP 2 A wash chart is provided to help you to select your required programme. Examples given for the maximum washing load weight for different fabric types. STEP 4 WARNING: This appliance must be earthed. Remember you may be charge





Category