495P3 Hub and Seal Kit Kit Consists of: 1 --27125 Gasket (Washtub) 1 --27184 Gasket (Outlet Tub Cover) 1 --27615P Sealant 1 --29728 Spline Insert 1 --Hub and Seal Assembly 1 --442P3 Drive Bell Seal Kit 1 --12-89-75 Instructions _ _,WARNING To reduce the risk of electric shock or injury to persons, disconnect washer power cord before servicing the washer. If water is present in the washtub, spin and pump out before attempting to remove the drive bell. 1. Refer to the appropriate service manual an

This cycle automatically drys loads to the dryness level selected. Automatic Regular/Perm Press Cycle Use for sturdy items like play or work clothes, permanent press items and synthetics. There are two settings in the AUTOMATIC REGULAR/ PERM PRESS cycle — MORE DRY and LESS DRY. MORE DRY will dry very small loads and some heavy items, such as blue jeans, but will overdry lightweight items, such as sheets and shirts. Overdrying can cause wrinkling, shrinking, excessive lint conditions, and will

This will shut off the water supply to the washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of the washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. Clean the following as recommended: Control Panel – Clean with a soft, damp cloth. CLEANING THE INTERIOR Clean the interior of the washer periodically to remove any dirt, soil, odor, mold, mildew or bacteria residue that may remain in

electrical supply. A time-delay fuse or circuit breaker and separate circuit is recommended. RECESSED AREA OR CLOSET INSTALLATION If a closet door is installed, the minimum ventilation openings in the top and bottom of the door are required (view 3). Louvered doors with equivalent air ventilation openings in the top and bottom are acceptable. A 19" (48.3 cm) JL *0"->. (Ocm) ► 14" max. (35.6 cm) <1 24 (155 cm 27" >|< *0" -Hi" K 25ift" H 4" K (68.6cm) (Ocm) (2.5cm) (64.8cm) (10.

Amana does not assume any responsibility for property damage or personal injury tor Improper service procedures done by an unqualified person. Amana LWA50AL PLWA50AL LWA50AW PLWA50AW LWA65AL PLWA65AL LWA65AW PLWA65AW LWA90AL PLWA90AL LWA90AW PLWA90AW LWD67AL PLWD67AL LWD67AW PLWD67AW LWD70AL PLWD70AL LWD70AW PLWD70AW RS3100006 Revision 1 39011 April 1999 MODELS LWD70A* WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions ma

Amana does not assume any responsibility for property damage or personal injury tor Improper service procedures done by an unqualified person. Amana LWA50AL PLWA50AL LWA50AW PLWA50AW LWA65AL PLWA65AL LWA65AW PLWA65AW LWA90AL PLWA90AL LWA90AW PLWA90AW LWD67AL PLWD67AL LWD67AW PLWD67AW LWD70AL PLWD70AL LWD70AW PLWD70AW RS3100006 Revision 1 39011 April 1999 MODELS LWD70A* WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions ma

electrical supply. A time-delay fuse or circuit breaker and separate circuit is recommended. RECESSED AREA OR CLOSET INSTALLATION If a closet door is installed, the minimum ventilation openings in the top and bottom of the door are required (view 3). Louvered doors with equivalent air ventilation openings in the top and bottom are acceptable. A 19" (48.3 cm) JL *0"->. (Ocm) ► 14" max. (35.6 cm) <1 24 (155 cm 27" >|< *0" -Hi" K 25ift" H 4" K (68.6cm) (Ocm) (2.5cm) (64.8cm) (10.