• Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders. • Do not get distracted and always concentrate on what you are doing. Use common sense. Never operate the tool when you are tired, sick or under the influence of alcohol or other drugs. • Do not operate this appliance with long loose hair or loose fitting jewellery. Tie long loose hair back and remove loose fitting jewellery. • Do

NOTE: The position of the throttle control handle may be adjusted for the best comfort after the blower is strapped onto the operator’s back. n Place small clamp on the bottom end of the bellows and install the upper tube onto the bellows; tighten clamp securely. n Join two straight tubes, thread into the upper tube and tighten securely. n Thread nozzle onto tube assembly and tighten securely. n Tighten all threaded joints securely. NOTE: Check all threaded joints after initial run to ensure the

180 CFM ........................................................................................................................................................................ 375 FEATURES KNOW YOUR BLOWER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. MOTOR The blower has a powerful 30cc engine with sufficient power to handle tough blowing jobs. THROTTLE TRIGGER The blower can be operated at any speed between idle and ful

This engine is certified to operate on unleaded gasoline intended for automotive use with an octane rating of 87 ([R + M] / 2) or higher. Do not use automotive oil or 2-cycle outboard oil. NOTE: Premium Exact Mix™ fuel mixture will stay fresh up to 30 days. DO NOT mix quantities larger than usable in a 30 day period. PREMIUM EXACT MIX™ (50:1) GASOLINE OIL 1 Gallon (US) 2.6 oz. 1 Liter 20 cc (20 ml) FILLING THE TANK WARNING: Always stop the engine before filling the fuel tank. Never add fuel to a

WARNING Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. OPERATING THE BLOWER See Figure 10. n Slip arm through harness strap and onto shoulder, then repeat for the other shoulder. Adjust the straps to a comfortable position. Refer to “Adjusting Harness Straps” earlier in this manual. Then remove unit for starting. n Start the blower. Refer to “Starting and Stopping” earlier in this manual. n Put

In California, new small off-road engines must be designed, built, and equipped to meet the state’s stringent anti-smog standards. In other states, new 2000 and later model year nonroad engines must be designed, built, and equipped at the time of sale to meet the U.S. EPA regulations for small nonroad engines. The nonroad engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two years of engine use from the date of s

It also does not cover any bonus items or included accessories. Only the power tool is covered under this warranty. With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual. Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty. For full details of the warranty terms and conditions please refer to our website – prompt service we suggest you log your serv

If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item. A small freight charge may apply. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified. This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use. It also does not cover any bonus

If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Fitting the collection bag 1. Connect the strap (fig A) onto the hook on the underside of the blower vacuum housing (fig B). 2. Attach the push-on plastic connector (fig C) to the outlet tube of the housing (fig D). Push the fitting of the collection bag directly onto the outlet until it “clicks” into position (fig E). 3