Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 16   File size: 398 kb   Manafacture: Oreck  
Category: Sanders
@name@name@name@name

Wrap your cord loosely around the two hooks on the handle. Remove brushes after use. The bristles may be damaged due to the weight of the machine. Store your machine in the upright position. After each use, remove wax or cleaning solutions. After sanding, blow sawdust off motor. Clean housing and bumper with damp cloth after each use. A little care will keep your Orbiter looking like new. USER MAINTENANCE: Lubrication: The Orbiter motor bearings are factory lubricated and sealed. All other servi

downloaded: 13   File size: 398 kb   Manafacture: Oreck  
Category: Sanders
@name@name@name@name

• Turn off all controls before unplugging. • Do not use appliance in an enclosed space where flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some mothproofing substances, or in an area where flammable dust is present. CAUTION This appliance must be connected to a grounded metal, permanent wiring system; or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance. ALWA

downloaded: 26   File size: 102 kb   Manafacture: Oreck  
Category: Sanders
@name

White Polish Pad 4. Floor finish liquid 5. Clean string mop, 16-20 oz. size 6. Bucket and wringer 7. Disposable plastic bag PROCEDURE: 1. Place disposable bag inside of bucket with wringer. This will protect floor finish from being contaminated and chemical residue remaining in bucket. 2. Pour quart size container of floor finish into the disposable bag. Amount of floor finish depends on size of floor area to be covered and number of coats to be applied. 3. Dip the mop tip ONLY into the floor fi





Category