Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 2   File size: 384 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

(3) Fit the protuberance of the depressed center wheel onto the wheel washer. English MAINTENANCE AND INSPECTION WARNING: . Be sure to switch power OFF and disconnect the plug from the receptacle during maintenance and inspection. . Using cracked, deformed or damaged wheels can lead to wheel breakage and resulting serious injury. 1. Replacing the depressed center wheel Replace the depressed center wheel when it has been worn out to about 2-3/8" (60mm) in external diameter. Confirm that there is

downloaded: 7   File size: 418 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

WARNING: Damaged cord must be replaced or repaired. 4. Check the receptacle If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs. If such a fautly receptacle is used, it may cause overheating, resulting in a serious hazard. 5. Check your work environment Ensure the following before operation; . No flammable gas, liquid, or object at worksite. . When grinding thin steel sheet it may cause a high booming noise.

downloaded: 1   File size: 829 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

Make sure it is firmly clamped and has been properly mounted. Refer to page 14 of this manual for Depressed Center Wheel Assembly and Disassembly. 8. Test the grinder before using Before actually beginning the grinding work, test the grinder by first clearing the area of all other personnel. Make sure the wheel guard is in place and that you are wearing eye protection. Turn the grinder “on”, and make sure the grinder runs smoothly and shows no abnormalities. Duration of the trial run is as follo

downloaded: 3   File size: 829 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

(2) Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. English (3) Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. (4) Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attach

downloaded: 8   File size: 562 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

Please read and understand this manual BEFORE operating the power tool. Please keep this manual available for other users and owners before they use the power tool. This manual should be stored in safe place. INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI AVERTISSEMENT Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorise peut entrainer la mort ou de serieuses blessures corporelles! Ce mode d’emploi contient d’importantes informations a propos de la securite de ce produit. Priere de lire et

downloaded: 4   File size: 2 mb   Manafacture: Hitachi  
Category: Sanders

downloaded: 5   File size: 610 kb   Manafacture: Hitachi  
Category: Sanders

downloaded: 0   File size: 259 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

2). English POLISHER OPERATION 1. Hold the polisher firmly by its housing and side handle (Fig. 1). The polisher produces a counterforce which must be controlled by firmly holding onto the polisher. 2. Switch operation This enables the polisher always to be controlled with the hand gripping the machine for maximum safety during polishing operations. Switch ON: Press the switch trigger. Switch OFF: Release the switch trigger. Switch ON: Press the switch trigger

downloaded: 12   File size: 400 kb   Manafacture: Hitachi  
Category: Sanders
@name@name@name

2. Polishing compound or wax are used corresponding to the state of finishing and the maximum polishing effect will be attained when the following method is taken. Polishing with a sander using fine sanding disc. Polishing with wool bonnet using compound substance final waxing. First put the compound and wax in small quantity on the surface to be polished, then, give a polish with the wool bonnet. . For use as a Sander 1. This unit is designed to provide sufficient polishing (sanding) power with

downloaded: 1   File size: 709 kb   Manafacture: Hitachi  
Category: Sanders
@name

STANDARD ACCESSORIES (1) Sanding paper (Velcro type) (Grain: #120) (Code No. 308519) ....................................... 1 (2) Dust bag (Code No. 323004) .............................................................................................. 1 OPTIONAL ACCESSORIES …………… sold separately . Sanding paper Size (Outer diameter) Type Grit No. Code No. AA40 308516 AA60 308517 AA80 308518 5” (125 mm) Velcro type AA120 308519 AA180 308520 AA240 308521 AA320 308522 AA400 308523 . Polyester buff





Category