Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 2   File size: 823 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

Refer to the chart to the right for extension cord information. If motor appears to labor or takes a considerable longer time to come up to speed reduce sanding pressure. Figure 1 Feet/Wire Guage (Stranded Copper) Source Voltage 0 - 100' 100 - 250' 208 6Use Voltage Booster 230 10 8 -6-Clarke® American Sanders Operator's Manual (EN) - Floorcrafter ENGLISH EN WARNING: The machine is heavy. Remove the motor from the machine before transporting. Get help loading the machine and motor. Use proper lif

downloaded: 1   File size: 823 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

Pay particular attention to a steady, even pace. 3. EXCESSIVE LIGHT CUTS...may reveal high spots on the paper/contact wheel and cause chatter. Take a heavier cut and increase the pace. 4. DEBRIS...lodged between the paper and the drum will leave chatter. On a belt sander, debris may be adhered to the drum. Insure the drum is clean and free of debris before placing the paper on. 5. ABRASIVE QUALITY...may vary. Belt seams can be thicker on low quality paper and cause chatter. Use only Clarke speci

downloaded: 16   File size: 823 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

Floor sanding machines can cause flammable material and vapors to ignite. Read the manufacturer's label on all chemicals used to determine combustibility. Keep the work area well ventilated. DANGER: Sanding dust can self ignite and cause an injury or damage. Remove the contents of the dust bag each time you finish using the machine. Always dispose of the dust in a metal container located outside of the building. Never leave a dust bag unattended with sanding dust in it. Empty the contents freque

downloaded: 5   File size: 383 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

DANGER: Using a machine with a damaged power cord could result in an electrocution. Do not use the machine if the power cord is damaged. Do not use the electrical cord to move the machine. WARNING: Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs must be performed by authorized personnel only. Keep all fasteners tight. Keep adjustments according to specifications. WARNING: Electrical components of this machine can "short-out" i

downloaded: 14   File size: 125 kb   Manafacture: Clarke  
Category: Sanders
@name

downloaded: 11   File size: 125 kb   Manafacture: Clarke  
Category: Sanders
@name

downloaded: 3   File size: 125 kb   Manafacture: Clarke  
Category: Sanders
@name

downloaded: 12   File size: 326 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

Part No. Description Qty. 1 85383A Screw, 10-32 x 3/4 8 2 50779A Handle, Front 1 3 50798A Lever, Switch 2 4 50820A Spring, Extension 2 5 50806A Button, Interlock 1 6 40109A Switch 2 7 50799A Interlock, Main 1 8 50821A Spring, Compression 1 9 50780A Handle, Rear 1 10 920722 Nut, 10-32 ESNA 8 13 10084A Cord, Interconnect 1 14 461404 Cam, Locking (Included in 51) 1 15 925592 Roll Pin, . (Included in 51) 1 16 441301 Bolt, Locking Cam (included in 51) 1 17 980349 Washer, Wear Cam 1 18 50791A Arm Link

downloaded: 5   File size: 125 kb   Manafacture: Clarke  
Category: Sanders
@name

downloaded: 0   File size: 269 kb   Manafacture: Clarke  
Category: Sanders
@name@name@name

Do not use the electrical cord to move the machine. WARNING: Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and repairs must be performed by authorized personnel only. Keep all fasteners tight. Keep adjustments according to specifications. WARNING: Electrical components of this machine can "short-out" if exposed to water or moisture. Keep the electrical components of the machine dry. Wipe the machine down after each use. For storage, kee





Category