Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station. 3 Reset Button Use this button to reset the power and restore the default factory settings. To reset without losing configuration settings, see ‘Reset’ on page 28-29. 4 On/off Button to switch unit on/off. 5 LAN Ports 10/100 Ethernet ports (RJ-45). Connect devices on your local area network to thes

THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO PREVENT ELECTRICAL SHOCK, THIS EQUIPMENT REQUIRES A GROUNDING CONDUCTOR IN THE LINE CORD. THE LINE CORD PROVIDED WITH THE EQUIPMENT IS ACCEPTABLE FOR USE WITH NEMA STYLE 5-15R AC RECEPTACLE SUPPLYING NOMINAL 120 VOLTS. DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PART OF THE BLADES EX

8. You may now access your CD-ROM drive. PCMCIA Cable Installation Attach the PCMCIA cable “ MC 36 Connector” to your Addonics Pocket Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch. Power Source Installation # Please refer to Text Box: MC-36 Pin Connector PCMCIA driver Installation For Windows 9X and Me 1. Plug the PCMCIA cable into your computer’s PCMCIA socket. You should see a “New hardware found” message box as shown. Click next to

The Compact Flash should be keyed to prevent the card from being incorrectly inserted. 2. Put the mechanism in the open position and slide the flat ribbon cable into the ZIF connector on the adapter. 3. Close the latch to secure the ribbon cable connection. 1.8” ZIF- CF adapter shown below attached to a 1.8” ZIF to 2.5” IDE converter 1.8” ZIF- CF adapter shown below connected to a 2.5” drive enclosure TECHNICAL SUPPORT Email: Internet: Technical Support (8:30 am to 6:00 pm PST) Phone: 4

All rights reserved. No part of this documentation or software may be reproduced or distributed in any form without prior written permission from ARESCOM, Inc. ARESCOM, Inc. has the right to make revisions and to change the contents of this document without any obligation to provide prior notice of such revisions and changes. ARESCOM, Inc. provides this documentation without any kind of warranty, either expressed or implied, including but not limited to the implied warranties of merchantability

Date/ Time SettingYou can change time setting from this page. Clicks “Apply” to save the setting. By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead. IP Configuration By default, “IP Config” is set to “Automatic IP”. This will allow the NAS adapter to obtain its IP address automatically. If you prefer setting it manually, select the static IP option, enter your own value a

.. . . .. . . .. . . .. . . .. 4 Installation Guide . . . . . . . . . . . . . . . 8 Step 1. Driver Installation . . . . . . . . . . . . . . . 10 Step 2. Plugging In the Hardware . . . . . . . . 12 Software Installation . . . . . . . . . . . . . . . . . 14 Ulead VideoStudio 8 . . . . . . . . . . . . . . . . . 15 French Manual . . . . . . . . . . . . . . . . . 31 Help Resources . . . . . . . . . . . . 58 Service and Warranty . . . . . . . . . . . . . . . 59 FCCInformation . . . . . . . . . . . . .

Click “Next” 5. If using a driver that has not been digitally signed by Microsoft, you will be asked if you want to continue the installation. Click Continue. 6. When the new hardware wizard has finish installing the Serial ATA card. Click “Finish” to complete the installations. Confirming Serial ATA Driver Installation 1. Right click the My Computer icon and select properties. 2. Click Device Manager in the Menu Tree. 3. Click the “+” sign in front of SCSI controllers. Silicon Image SATA

Proof of purchase will be required before any warranty consideration by ADS occurs. This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without prior written permission from ADS. This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacem

Clare, Ireland Phone: +353.61.702042 Fax: +353.61.702001 Southern Europe and MEA Office 51-55 me Hoche 94200 Ivrysur Seine, France Phone:+331.43.90.19.20 Fax:+33 1.46.58.67.06 Installation Guide O System Requirements Requirements: • IBM Compatible PC or MAC* with available USB 1.1 or USB 2.0 port •Available FireWire port • USB 2.0 Host controller requires USB drivers from Microsoft (WinXP) or third party drivers shipped with USB Host controller card. NOTE: • For FULL USB 2.0 bandwidth