Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Proof of purchase will be required before any warranty consideration by ADS occurs. This warranty does not cover any damage caused by negligence, non-authorized modifications, or parts installed without prior written permission from ADS. This warranty does not apply if the product has been damaged by accident, abuse, or misapplication, nor as a result of service to the product by anyone other than ADS. If your ADS product is not in working order, your only recourse is repair or warranty replacement, as described above. UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for consequential damages, including but not limited to any lost savings, lost profits, or any other damages, caused by the use of any ADS Technologies, Inc. product or inability to use the product, even if the dealer or ADS Technologies, Inc. has been advised of such liability or other claims. This includes damage to property and, to the extent permitted by law, damages for personal injury. This warranty is in lieu of all other warranties including implied warranties of merchantability and fitness for a particular purpose. FCC Information Federal communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna . * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio TV technician for help. Notice: (1) The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. (2) Shielded interface cables and AC power cord, if any, must be used in order comply with the emission limits. For Technical Support Questions: Check the ADS web site : E-mail ADS for help: support@adstech.com Call ADS for help: 1-562-926-4338 Support Hours: USB 2.0 Ultra Hub User’s Guide Product Part #: USBH-2004 Product UPC: 757887-20400-6 Part #: 2004-511 ADS Technologies - Cerritos - CA - 90703 Phone: 562.926.1928 - Fax: 562.926.0518 Support: 562.926.4338 European Support: +353-61-702042 USB 2.0 Hub System Requirements: Intel Celeron or Pentium or AMD Athlon or Duron Processor Windows 98SE, ME, 2000, XP Windows CD (for driver installation) One (1) Available USB Port Mac G3 or higher* *USB 2.0 is currently not supported by Apple. You can upgrade your G3 Mac or Higher to USB 2.0 by adding an ADS Technologies USB 2.0 Host PCI Card. Package Contents: 1. USB 2.0 Hub 2. USB Host-to-Hub connection cable 3. 7.5 VDC 2Amp Power Adapter 4. Users Manual Connecting the USB 2.0 Ultra Hub: Step 1 Connect the DC power adapter to your USB 2.0 Ultra Hub. Step 2 Connect the DC power adapter into a power source. Step 3 Locate an available USB port on the back of your PC. NOTE: For FULL USB 2.0 bandwidth speeds, you must first have a USB 2.0 host. Step 4 Insert your Windows Operating System CD into your CD-ROM drive. NOTE: On certain operating systems, like Windows 98SE, you might have to type in the path to your CD-ROM (example “d:\”) drive and left mouse click one time on the button that says “OK.” Step 5 Plug in the USB Host-to-Hub connector cable (Fig. A) to the USB port on your PC (Fig. B) then connect the USB Host-to-Hub cable to the USB 2.0 Ultra Hub. Windows will now detect your new hardware. Click on the “OK” button. For Mac Users: Step 1 Connect the DC power adapter to your USB 2.0 Ultra Hub. Step 2 Connect the DC power adapter into a power source. Step 3 Locate an available USB port on the back of your Mac. NOTE: For FULL USB 2.0 bandwidth speeds, you must first have a USB 2.0 host. Step 4 Connect the USB Host-to-Hub connector cable to the available USB port on your Mac then connect the USB Host-to-Hub cable to the USB 2.0 Ultra Hub. Your Mac OS will now detect your new hardware. Fig. A © 2002 ADS Technologies. All Rights Reserved First Edition: Revision 1.0 August, 2002 Microsoft, MS-DOS, Windows, Windows 95, Windows 98SE, Windows 2000, Windows ME and Windows XP are registered trademarks of Microsoft Corporation. IBM is a registered tradema...