Login:
Sorted: Name ↑   Downloads   Rate   Size ↓  
downloaded: 17   File size: 88 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

When required for large areas, or multiple-room coverage, multiple receivers can be connected in parallel on the AXlink bus. FIG. 1 AXR-RF RF Receiver AXPPWRAXMGNDDEVICEAXlinkONDATARADIOAXlink rear front Specifications Power Consumption 780 mW; ±12 VDC, 65 mA (max.) Dimensions (HWD) 1.5" x 5.09" x 5.27" (3.81 cm x 12.93 cm x 13.39 cm) Weight 10.56 oz. (299.37 g) Front Panel Components: Radio data LED AXlink LED Red LED lights to indicate the AXR-RF has received an RF signal from an AMX transmitt

downloaded: 5   File size: 90 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

1 TVM-RX03 Endeleo Managed TV Receiver The Cat5, 5e or 6 cable provides audio/video transmission, power for the receiver and a unique bi-directional IR pass-through for controlling displays and video source devices such as DVD players or video recorders connected to the Endeleo Distribution Hub or Receiver. The TVM-RX03 also provides an LED display for channel identification and local IR emitter and RS-232 serial ports for control of LCD/Plasma screens, video projectors and other devices. Fea

downloaded: 13   File size: 107 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

3 SWT pinout configuration Connecting SWT Speakers Wiring Diagram - Expanded Configuration Matrix Audio SWT Speakers are different from any other speaker available on the market. They allow you to control a single zone of audio without a keypad being installed. Therefore, some different wiring practices must be considered for proper operation and control. This is achieved by “daisy-chaining” from the first speaker to the second speaker. The main run of 16/4 from the controller will go directly t

downloaded: 1   File size: 107 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

FIG. 1 DAS-AMP4/8 amplifiers •The DAS-AMP4 is a 4-channel amp that provides 2 speaker pairs per unit. •The DAS-AMP8 is an 8-channel amp that supports an additional 4 speaker pairs per unit. Features • High-quality sound - delivers 60 watts of high-quality sound per channel. • Expandable - stack up to three Carbon XA amplifiers units per zone to allow up to 12 speaker pairs (24 channels) in a single zone. • Easy installation - SWT (Speaker Wire Technology) makes installation simple using four-con

downloaded: 6   File size: 107 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

The main run of 16/4 from the controller will go directly to the first speaker in the zone. • At the controller end, the wiring is left-to-right: L D G R. • At the speaker end, refer to the labeling on speaker PCB to ensure the correct wiring. The labelling at both ends must match or the IR control will not work (i.e.: if you used the RED wire for the Left Audio labelled “L” at the zone output, you must use the RED wire for the pin labelled “L” on the speaker connector). Note: Be sure to screw t

downloaded: 1   File size: 118 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

For connection to long cable runs, outputs are 75 ohm driven. The AVB-DA-RGBHV-0106 is housed in a 1U metal enclosure and features an internal 100-240V power supply. (front) FIG. 1 Solecis AVB-DA-RGBHV-0106 Common Application Ideal for delivering up to six outputs over long cable runs. Product Specifications AVB-DA-RGBHV-0106 Specifications RGB Input (BNC) Number: 1 Level: Analog Max Level: 1V p-p Impedance: 75 ohm Sync Input Type: Analog or TTL Impedance: 75 ohm RGB Video Bandw

downloaded: 0   File size: 118 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

The AVB-DA-RGBHV-HD15-0106 can be used for RGBHV, RGBS, RGsB and YUV. The unit is a 1-In 6-Out RGBHV distribution amplifier on HD-15 connectors and Output 1 can be used as a local monitor output. The AVB-DA-RGBHV-HD15-0106 is housed in a 1U metal enclosure and features a 100-240V internal power supply. (front) AMX souas I -1 Video IN FIG. 1 Solecis AVB-DA-RGBHV-HD15-0106 L Video OUT 1-6 (rear) Common Application Great for delivering up to six outputs over long cable runs. Product Sp

downloaded: 1   File size: 122 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

With video bandwidth exceeding 350 MHz (-3dB) the AVB-DA-RGBHV-0103 is ideal for all RGBHV, RGBS, RGsB and YUV type signals. The AVB-DA-RGBHV-0103 can be used as a composite video distribution amplifier and the terminated inputs and 75 ohm driven outputs make it excellent for connection to long cable runs. The AVB-DA-RGBHV-0103 is housed in a metal enclosure and is powered by the supplied external power adaptor. (front) Video OUT 3- Video OUT 1 —I FIG. 1 Solecis AVB-DA-RGBHV-0103 Common App

downloaded: 3   File size: 134 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

The buffered input provides for a local monitor loop through and main output for onward connection to monitors, projectors and plasma displays. The main output features 75 ohm drive for connection to long cable runs and TTL sync restore for total compatibility. Activity LED green = signal source present red = unit powered but not connected to RGBHV source |— Monitor IN Audio IN-(front) (rear) Video OUT FIG. 1 Solecis AVB-DA-RGBHV-ST-0102 Product Specifications Audio OUT- AVB-DA-RGBHV-ST-

downloaded: 3   File size: 146 kb   Manafacture: AMX  
Category: Receivers & Amplifiers
@name

1). Wiring Diagram FIG. 1 DAS-LLC Line Level Converter Installation Instructions 1. Connect a small run of 16/4 between the zone output on the Matrix Audio controller and the connector labelled “From Zone” on the DAS-LLC. 2. Connect the 16/4 wire run from the zone's keypad to the connector labelled “To Keypad” on the DAS-LLC. 3. Connect a stereo RCA cable from the Left and Right RCA jacks labelled “To Amplifier” on the DAS-LLC to the RCA inputs on the external amplifier. 4. Connect a smal





Category