Votes - 4, Average rating: 4 ( )

Manafacture: Philips File size: 1.84 mb File name: Language of manual:

To connect your TV to computers, the Internet, or both, you need: . An ethernet cable that is shorter than 3 metres. . A computer network that includes: a) A universal plug-and-play (UPnP) router and b) A computer with one of these operating systems: Microsoft Windows XP, Microsoft Windows Vista, Mac OSX, or Linux. . To connect your TV to computers, you also need media server software that is set to share files with your TV. See Use your TV > Browse PC through DLNA (Page 19). . To connect your TV to the Internet, you also need a high-speed connection to the Internet. Note: This DLNA1.5 network feature supports these computer operating systems: Microsoft Windows XP or Vista, Intel Mac OSX or Linux. Connect 1. Switch on the router and switch on its DHCP setting. 2. With the ethernet cable, connect the router to the TV. Alternatively, you can also connect the router to the TV wirelessly, through a wireless USB adaptor (not included). See Connect your TV > Computers and the Internet > Wireless LAN ready (Page 54). 3. Press , select [Setup] > [Connect to network], then press OK. 4. Follow the onscreen instructions to install the network. 5. Wait for the TV to find the network connection. 6. If you are prompted, agree to the End User License Agreement. Wireless LAN ready This section is only for wireless ready TVs. With the Wireless USB adapter PTA01 accessory (sold separately), you can connect the TV to your home network wirelessly. You can enjoy the best of the web from Net TV services, and sharing of content between your devices connected to the home network using Wi-Fi MediaConnect or DLNA, seamlessly and hassle free. Note: . The wireless network operates in the same 2.4GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause Wi- Fi interferences. Move these devices away from the TV with the connected Wireless USB adapter. . You should turn off any unused network equipment in the home network as this increases network traffic. . Reception quality is dependent on the location of the wireless router, as well as the quality of services provided by the local Internet Service Provider. . When playing video over your wireless home network, we recommend that you use an IEEE 802.11 N router. The connection speed may differ according to the operating environment of your wireless home network. Make your TV wireless 1. Switch on your wireless network router. 2. Insert the USB adapter PTA01 into the USB connection at the side of the TV. The wireless installation starts automatically. 3. Follow the on screen instructions. WPS - Wi-Fi Protected Setup If your router supports WPS (Wi-Fi Protected Setup), press the WPS button on the router. Return to the TV in 2 minutes, select [WPS] and press OK. The TV connects to your network. This takes about 2 minutes. Complete the installation. Most new wireless routers have the WPS system and carry the WPS logo. The WPS system uses WPA security encryption and cannot be combined with devices on your network that use the WEP security encryption. If you still need this WEP device in your network, install with [Scan] > [Custom]. Scan for routers If you have several routers in your network, you can select the network you need. To select a specific network router, press [Scan]on the first page of the installation. The routers with WPS and the strongest signal are shown first in the list on screen. Select the router you need. If you are connecting a WPS router, select [WPS] on the TV. . If you have set the PIN code in your router software, select [WPS pincode:] and enter the code. . To enter the encryption key manually, select [Custom] and enter the key. PIN code To set the secured connection with a PIN code, select the PIN code and press OK. Write down the 8 digit PIN code shown on the TV and enter it in the router software on your PC. See the router manual for where to enter the PIN code. Custom To enter the encryption key (the security key) manually, select [Custom] and press OK. If you have WPA security on your router, enter the passphrase with the remote control. To access the on-screen keyboard, select the text entry field and press OK. If you have WEP security encryption, the TV asks for the WEP encryption key in hexadecimal numbers. Find this hexadecimal key in the router software on your PC. Write down the first key of the WEP keys list and enter it on the TV with the remote control. If the security key is accepted, the TV is connected with the wireless router. If asked, agree to the End User License Agreement. If you are using the Wireless USB adapter, keep it connected to the USB connector on the TV. Wi-Fi MediaConnect What you can do With Wi-Fi MediaConnect, you can project your PC screen on the TV wirelessly. With the *Wi-Fi MediaConnect CD-ROM, you can download the software for free. Wi-Fi MediaConnect is only available for PC. *The Wi-Fi MediaConnect CD-ROM is supplied with the Wireless USB adapter, PTA01. Wh...

Download now

Please, enter two numbers from picture: