Votes - 0, Average rating: 5 ( )

Manafacture: Philips File size: 1.84 mb File name: Language of manual:

1. In the [Clock] menu, select [Date] or [Time], then press OK. 2. Use the Navigation buttons to make your selection. 3. Select [Done], then press OK. Sleeptimer Sleeptimer switches the TV to standby after a specified time. You can switch off your TV earlier or reset the sleeptimer during the countdown. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Sleeptimer]. 3. Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to 180 minutes, in steps of five minutes. The sleeptimer is switched off if it is set to zero minutes. 4. Press OK to activate the sleep timer. The TV switches to standby after the specified time. Child lock To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes. Set or change the child lock code 1. Press . 2. Select [Setup] > [Channel settings] > [Child lock]. 3. Select [Set code], or [Change code]. 4. Enter the code with the Numeric buttons. Tip: If you forget your code, enter '8888' to override any existing codes. Lock or unlock channels 1. In the child lock menu, select [Channel lock]. 2. Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears. 3. Select channels to lock or unlock. Parental rating Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your child's age. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Child lock] > [Parental rating]. A message prompts you to enter the child lock code. 4. Enter the child lock code with the Numeric buttons. 5. Select an age rating, then press OK. All programmes above the selected age rating are blocked. For information on child lock codes, see Use more of your TV > Set locks and timers > Child lock (Page 31). View subtitles Analogue channels 1. Switch the TV to an analogue TV channel. 2. Press TEXT. 3. Enter the three-digit page number of the subtitles page (usually '888'). 4. Press to exit teletext. Subtitles display if available. Digital channels 1. Press OPTIONS. 2. Select [Subtitles], then press OK. 3. Select [Subtitles off], [Subtitles on] or [On during mute], then press OK. Note: . If MHEG application is activated, subtitles are not displayed. . If you select [On during mute], subtitles are displayed only when you press to mute the sound. Subtitle language You can change the subtitle language on some digital channels. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Subtitle language]. 3. Select [Primary subtitles] or [Secondary subtitles] for the preferred language. 4. Press OK to confirm. Tip: You can also press OPTIONS > [Subtitle language]. View Scenea What you can do You can display a default picture as the wallpaper on your TV. You can also load another picture as the wallpaper. If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer. What you need To use another picture as the wallpaper, you need a USB storage device that contains a picture that is less than 1 MB in size. Switch on 1. Press . 2. Select [Scenea], then press OK. The default picture is displayed. Note: The wallpaper is displayed for the duration of the sleeptimer. For more information on sleeptimer, see Use more of your TV > Set locks and timers > Sleeptimer (Page 31). Set TV wallpaper You can load another picture as the wallpaper. Note: Loading a new picture overrides the existing picture. 1. Connect the USB storage device to the TV. 2. Press . 3. Select [Browse USB], then press OK. 4. Select a picture, then press OPTIONS. 5. Select [Set as Scenea], then press OK. 6. Select [Yes], then press OK. 7. Press any button to exit Scenea. Set Scenea lounge light When the TV is in standby, you can switch on Ambilight and create a lounge light effect with your wallpaper. Ambilight is available on certain models only. When the TV is in standby, press AMBILIGHT on the front of the TV. Note: It can take more than 5 seconds for the lounge light to switch on. To select another colour for the lounge light, see Use your TV > Ambilight > Setup. Use EasyLink What you can do Get the most out of your HDMI-CEC compliant devices with Philips EasyLink enhanced control features. If your HDMI- CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control . Note: Other brands describe HDMI-CEC functionality differently. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink. After you switch on Philips EasyLink, these features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source. One-touch standby When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. System audio control If you con...

Download now

Please, enter two numbers from picture: