ESSENTIAL INSTRUCTIONS READ THIS PAGE BEFORE PROCEEDING! Your purchase from Rosemount Analytical, Inc. has resulted in one of the finest instruments available for your particular application. These instruments have been designed, and tested to meet many national and international standards. Experience indicates that its performance is directly related to the quality of the installation and knowledge of the user in operating and maintaining the instrument. To ensure their continued operation to t

b. Connect the four wires from the core processor to the appropriate terminals on the transmitter. See Table 3 and Figure 13 (standard core processor) or Figure 14 (enhanced core processor). No bare wires should remain exposed. Do not ground the shield or drain wire(s) at the transmitter. Table 3. Transmitter terminals for 4-wire cable Terminal Wire color(1) Function 13 Red VDC+ 14 Black VDC– 15 White RS-485A 16 Green RS-485B (1) Wire colors apply only to 4-wire cable supplied by Micro Motion. 1

For information on I.S. applications, refer to Micro Motion approval documentation. For complete instructions about configuration, maintenance, and service, refer to the instruction manual shipped with the transmitter. WARNING Improper installation in a hazardous area can cause an explosion. For information about hazardous applications, refer to Micro Motion approval documentation, shipped with the transmitter or available from the Micro Motion web site. WARNING Hazardous voltage can cause sever

The iPod will continue charging in the dock. 9 10 Listening to a non-docking iPod® or other portable audio devices If you are using an iPod without a docking port, other MP3 player, or other portable audio device, you can play it through the iSoundSpa via the Aux Jack located on the back of the unit. 1. Plug one end of the Connection Cable (included) into the headphone or line-out jack on your MP3 device and the other end of the Connection Cable into the iSoundSpa Aux jack, located on the back o

Insert 2 alkaline AAA batteries according to the polarity direction indicated. 2. Place the home receiver (SoundSpa Premier) as close as possible to the remote sensor. This will help with synchronization between the two units. NOTE: Once you are ready to position your remote sensor and home receiver, ensure that the distance is not outside the effective transmission range (100 feet). Some building materials and location of the home receiver or remote sensor can affect transmission quality and ra

Insert the disc, label side up, into the CD compartment. Note: Be sure CD is securely fastened in to center. 3. Close the CD compartment door 4. Press the CD button (Fig. 1), the number of tracks Note: NO will be displayed if you press CD when there in the disc player 5. Press PLAY/PAUSE (Fig. 1) to begin playing CD 6. Press SEEK/TRACK (Fig. 1) to skip to beginning of the track; press SEEK/TRACK (Fig. 1) twice to skip to the beginning of the previous track; press (Fig. 1) to skip to the next tra

Warranty is solely through HoMedics Service Center. Service of this product by anyone other than HoMedics Service Center voids warranty. This warranty provides you with specific legal rights. You may have additional rights which may vary from state to state. Because of individual state regulations, some of the above limitations and exclusions may not apply to you. For more information regarding our product line in the USA, please visit: ©2004 HoMedics, Inc. and its affiliated companies, all righ

The transmitter requires 24 VDC. The sensor provides an accurate and predictable four-wire, 4-20 mA output signal for temperature and a second 4-20 mA output signal for humidity. Dimensions FRONT 0.95" (241mm) 2.25" (572mm) 2.75" (699mm) 0.75" (191mm) VIEW SIDE VIEW 4.5" (1143mm) Wall TOP VIEW Specifications Output 4 to 20 mA Sensor 10K . platinum RTD Supply Voltage 24 VDC Tolerance of Resistance (Accuracy) ±1.5°F (±0.83°C) ±2% RH (from 15 to 95% RH) Response Time 20 seconds for a 63% step Envir

Connecting this unit to other power sources may damage the unit. This unit has a polarized AC plug with one wide blade and one narrow blade.This plug will only fit into a matching polarized AC outlet. This is a safety feature to reduce the possibility of electric shock. If this plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet. You should have your outdated outlet changed by a qualified, licensed electrician. Do not file the wide blade on the plug, or use a

3 Electrical power source..................................................................3 Product registration ........................................................................4 For your records ...............................................................................4 Important battery precautions ...................................................4 Precautions for the player .............................................................4 IMPORTANT SAFETY INSTRUCTIONS ...........