The tacks should not come into contact with the internal wire of the aerial. Whether you decide to get an aerial professionally installed or opt to use the supplied aerial it should be connected to the FM Antenna input 7 on the rear of the unit. For use in North America, use an F-type antenna connector; for Europe and other areas, use a female Belling Lee-type coaxial connector. T61 4 Connecting to other equipment Interconnect cables Interconnecting cables are not supplied with this tuner. We re

If you move to a different broadcasting region, however, or if a station ceases transmission, stations may be shown as available that can no longer be received. Individual stations cannot be deleted. To remove stations from the selection list that can no longer be received, first press the U button. Turn the navigation control wheel until the display shows: DAB Setup Erase station list? Press O on the remote control or oK on the front panel to delete all services. A delete operation should alway

et IN LOCAL. Use with a local IR receiver when the AVR350 front panel IR receiver is obstructed. fk IN ZONE 2. This allows the AVR350 to be controlled remotely from Zone 2 via infrared remote control (see section ‘Zone 2 connections’ above for further details). fn RS232 CONTROL Use with control devices having an RS232 serial port (for example, Crestron and AMX touch screen controllers). This connection is also used for upgrading control software. See the sections at the end of this manual for co