Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 8   File size: 2 mb   Manafacture: Eureka  
Category: Vacuum Cleaners
@name

to 7:30 p.m., (CST), Monday - Friday and 10 a.m. to 6:30 p.m. Saturday. *En Mexico llame al (55) 5343-4384 PLEASE RETAIN We suggest you record the model, type and serial numbers below. They are located on the silver rating plate on your cleaner. For prompt and complete service information, always refer to these numbers when inquiring about service. Model & Type ___________________________ Serial No. ______________________________ It is also important to keep your receipt as proof of date of purc

downloaded: 2   File size: 1 mb   Manafacture: Eureka  
Category: Vacuum Cleaners
@name@name@name

A, can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. Note: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code. OptiHEAT™ Heat Retention System (available on some models only) IMPORTANT: Fill clean water tank with hot tap water. Do no

downloaded: 6   File size: 650 kb   Manafacture: Eureka  
Category: Vacuum Cleaners
@name

Obtaining Warranty Service To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Eureka Authorized Warranty Station. You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station is “Eureka Authorized.” For the location of the nearest Eureka Authorized Warranty Station or for service information, telephone toll free: USA: 1-800-282-2886 Mexico: 254 23 52 Canad

downloaded: 2   File size: 493 kb   Manafacture: Eureka  
Category: Vacuum Cleaners
@name

Power Switch 0 = Off(I= On ) D. Push power switch on, which is located on the back side of the unit. E. Pull up and hold the solution release trigger and apply two spraying strokes by moving the carpet shampooer/extractor forward and then backward at a moderate pace two times. As the nozzle moves over the carpet, the cleaning solution is sprayed onto the carpet. At the same time the nozzle picks up the dirty water and places it in the recovery tank. It is important to move the carpet shampooer/e





Category