Keep cord away from heated surfaces. damage when using your carpet cleaner, the following: Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Sears Service Center. Close supervision is necessary when any appliance is used by or near children. Do not allow carpet cleaner to be used as a toy or to run unattended at any time. Do not point tools toward people or pets. Use only commercially avai

9 WASH AND DRY Step on Nozzle Setting pedal if necessary to switch from HARD FLOOR DRY VAC to WET SCRUB & VAC position. Slide Brush On/Off switch to the ON position. Pull Solution Trigger to start the flow of cleaning solution. NOTE; Cleaner will continuously dispense solution until Solution Trigger is released. RNING To r, uce _1: the risk of unplug Injury before from IMPOI hard 4T: When changing between nd carpet cleaning modes, use the correct nozzle: ;leaning -tangerine nozzle ning -green be

Tenga especial cuidado a[ limpiar escaleras. No tire de la manguera con la limpiadora para a[fombras arriba de una escalera. No coloque la limpiadora de alfombras sobre los escalones. Use }a limpiadora de alfombras solamente para Io que ha sido disefiada segQn se describe en [as instrucciones. Use solamente los accesorios recomendados por Sears, Roebuck and Co. El uso de otros accesorios puede ser peligroso. No se recomienda el uso de cordones de extensi6n. Si es indispensable usar un cord6n de

Read it thoroughly before operating the machine. This product is intended for commercial use only. PARTS AND SERVICE Repairs, when required, should be performed by your Authorized Nilfisk Service Center, who employs factory trained service personnel, and maintains an inventory of Nilfisk original replacement parts and accessories. Call the NILFISK DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your machine. (Dealer, affix service sticke

Then turn the power switch Off (O) and unplug the machine. 12 Push the machine to a designated waste water “DISPOSAL SITE” and empty the recovery tank. To empty, pull the Recovery Tank Drain Hose (12) from its rear storage hanger, then remove the plug (hold the end of the hose above the water level in the tank to avoid sudden, uncontrolled flow of waste water). Refill the solution tank and continue cleaning. USING ATTACHMENTS To use accessory tools, disconnect the recovery hose at the Recover

The right accessories not only enable the cleaning job to be done in the fastest and most efficient way, they also help to prevent damage to the machine and reduce maintenance cost. All products carrying the Nilfisk-Advance label have been fully tested and are guaranteed for use with our equipment. Specifications and details are subject to change without prior notice. Nilfisk-Advance A/S Sognevej 25 DK-2605 Brondby Denmark Tel.: +45 4323 8100 Fax: +45 4343 7700 96020906-09, © 2005/09 Nilfisk-Adv

• Quality design and first-class engineering saves water and chemicals • State-of-the-art moisture recovery speeds up drying time • Durable construction for long-life Rotating brush for deep cleaning Rugged aluminium vacuum shoe for excellent water recovery Rotating brush for deep cleaning Rugged aluminium vacuum shoe for excellent water recovery AX 310/410 – the newest and most modern options in carpet cleaning The control panel is simple to understand and easy to use AX 310 is an economically

2 MANUAL PURPOSE AND CONTENTS ........................................................................................................... 2 TARGET ........................................................................................................................................................... 2 HOW TO KEEP THIS MANUAL ....................................................................................................................... 2 IDENTIFICATION DATA .............................

2 MANUAL PURPOSE AND CONTENTS ........................................................................................................... 2 TARGET ........................................................................................................................................................... 2 HOW TO KEEP THIS MANUAL ....................................................................................................................... 2 IDENTIFICATION DATA .............................

Ing. Wolfgang Nieuwkamp Tests and approvals ALTO Deutschland GmbH Guido-Oberdorfer-Straße 2-8 D-89287 Bellenberg Bellenberg, 2007-01-02 103 Nilfisk ALTO Why Compromise HEADQUARTER DENMARK Nilfisk-Advance Group Sognevej 25 2605 Brandby Denmark Tel.: (+45) 43 23 81 00 Fax: (+45) 43 43 77 00 E-mail: mail@nilflsk-advance.dk SALES COMPANIES AUSTRALIA Nilfisk-ALTO 48 Egerton St. PO box 6046 Silverwater NSW 2128 Australia Tel.: (+61) 2 8748 5966 Fax: (+61) 2 8748 5960 AUSTRIA Nilfisk-Ad