2. Remove the two screws on the base that appear when the remote is removed. 3. Position strap around steering wheel, and pull tight. Replace plate and screws. 4. Insert battery (Lithum 2032 3-volt) into remote contol, and reinstall theremote onto the base/strap. VR185 Infrared Sensor 3.5 mm Jack (21/64 hole or 9.2 mm drill Installing the IR Sensor Select a mounting location close to the steering wheel, and drill a 21/64 hole for the 3.5 mm. jack to pass through. Route the infrared sensor wire t

The 18 foot extension cable may be used to connect the remote to the radio. Up to two additional extension cables (MWREXT) may be purchased and used to extend the reach of the remote up to 54 feet. Important: When connecting the cables, be sure to route the extension cable away from sharp objects, corners, and places where it might get pinched, as this could affect performance and cause damage to the unit. Up to two more remote controls can be added with a "Y" cable adapter (MWRYCBLS). Cableado