Call appearance is on hold. Call is being transferred or conferenced. Call appearance is selected and will be used when you go off-hook. Call appearance is available. Answering and making a call Answering a call • If you are not on another call, do one of the following: -Lift the handset. -Press the call appearance button whose green LED flashes for the incoming call. -Press the Speaker button to answer using the speakerphone. • If you are on another call, press the call appearance button whose

When operated and maintained according to the instructions in this manual, your Briggs & Stratton accessory will provide years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with generator products and how to avoid them. Because Briggs & Stratton does not necessarily know all the applications this accessory could be used for, it is important that you read and understand these instructions. Keep this manual for future reference

Upon plug-in, your telephone immediately begins downloading its operational software, it's IP address, and any special features programmed by your System Administrator from the server to which it is connected. Report any delay of more than 10 minutes to your System Administrator. • Phone does not activate after a power interruption: Allow a few minutes for re-initialization after unplugging, powering down the phone, server problems, or other power interruption causes. • Display shows an error/in

(Outside the US, call 1 207 866-6701). Order Document number: 555-230-752 o o CONFERENCE To add another party to a call (for a total of up to 6 parties) 1. Press (Cof. 2. Dial number of new party and wait for an answer. 3. Press Coof again. 4. Repeat Steps 1 through 3 for additional connections to the conference. HOLD To put a call on hold Press CHoid>. To answer a new call while active on another 1. Press CHOd5. 2. On Single-line sets, press and then release the switchhook. On Mu

For ad- Issue 1 ditional support telephone numbers, see the Avaya Web site: June 2009 Speaker ker LED Indicator Microphone Graphic LCD Display Keypad Menu Key Exit Key Soft Keys Call Key Redial Key Microphone LED Indicator LED Indicator Microphone Up/Down Scroll Keys Select Key Up/Down Volume Keys Mute Key Dialing Keypad Using the Avaya 1692 IP Conference Phone Place the phone in the middle of a room, unobstructed during use. Because the microphones are very sensitive, do not cover the phone, bl

Select 8. Press the Clr key one or more times to return to the idle display. Configuring the LED Indicator (4075 only) Use the information in this section to configure the LED indicator that appears to the left of the speaker on the Avaya 4075 DECT Handset. For more information, see “LED indicator (4075 only)” (page 33). Use the following steps to configure the LED indicator: 1. Open the General settings menu using the steps in “Accessing the General settings menu” (page 156). 164 Telephone sett

8 Active Mode .............................................................................................................................................8 Modes of Operation..................................................................................................................................8 Push-to-Talk Mode...................................................................................................................................9 Standby Mode...............................

Press input + . The Primary Input selection dialog appears and contains small representations of the available input sources. b. Use the arrow keys to select a new input and then press OK. • During a call from any call screen: a. Press the input button. The Primary Input selection dialog appears and contains small representations of the available input sources. b. Use the arrow keys to select a primary input and then press OK. Changing the Presentation Input • When the system is idle and the mai

The call is placed on hold. Account 2. Press the Account Key. Conf 3. Dial the charge account number. You receive dial tone. 4. Dial the number of the person you want to add to the conference. 154 Additional Call Features Additional Call Features Conf 5. Press the Conference key a second time to conference all parties together. Note: You can talk to either party privately, press the Incalls key to talk to originator or press the Conf key to talk to the transfer number. Alternating between these