Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
Use a speed dial number or dial a number manually using the number keypad. [Incompatible] (only for SCX4521F/ SCX4521FR) The remote machine did not have the requested feature, such as a delayed transmission. This message also occurs if the remote machine does not have enough memory space to complete the operation you are attempting. Reconfirm the remote machine’s features. [Line Busy] (only for SCX4521F/ SCX4521FR) The receiving party did not answer or the line is already engaged. Try again after a few minutes. [Line Error] (only for SCX4521F/ SCX4521FR) Your machine cannot connect with the remote machine or has lost contact because of a problem with the phone line. Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on. See ?$paratext>? on page 7.14. Load Document You have attempted to set up a copy or fax operation with no document loaded into the ADF. Load a document into the ADF and try again. [LSU Error] A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. Memory Dial Full (only for SCX4521F/ SCX4521FR) The fax jobs queue in the memory is full. Cancel unnecessary fax jobs in the memory. Display Meaning Suggested solutions Memory Full (only for SCX4521F/ SCX4521FR) The memory is full. Delete unnecessary documents and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation. [No Answer] (only for SCX4521F/ SCX4521FR) The receiving fax machine has not answered after several redial attempts. Try again. Make sure that the receiving machine is operational. [No Cartridge] The toner cartridge is not installed. Install the toner cartridge. See ?$paratext>? on page 2.2. Not Assigned (only for SCX4521F/ SCX4521FR) • The speed dial location you tried to use has no number assigned to it. • The ID you entered is not assigned. • Dial the number manually using the number keypad or assign the number. For storing a number, see ?$paratext>? on page 7.8. • Enter the correct ID. . [No Paper] Add Paper The paper in the tray has run out. Load paper in the tray. See ?$paratext>? on page 2.3. Operation Not Assigned (only for SCX4521F/ SCX4521FR) You are doing the Add/Cancel operation, but there are no jobs waiting. Check the display to see if there are any scheduled jobs. The display should indicate them in Standby mode; for example, Delay Fax. Out of Range The current date and time you entered is not correct. Enter the correct date and time. [Paper Jam 0] Open/Close Door Paper has jammed in the feeding area of the tray. Clear the jam. See ?$paratext>? on page 9.2. [Paper Jam 1] Open/Close Door Paper has jammed in the fuser area or around the toner cartridge. Clear the jam. See ?$paratext>? on page 9.3. [Paper Jam 2] Check Inside Paper has jammed in the paper exit area. Clear the jam. See ?$paratext>? on page 9.3. [Power Failure] Power has turned off then on and the machine’s memory has not been saved. The job which you were trying to do before the power failure must be completely re-done. Display Meaning Suggested solutions 9.5 Troubleshooting Remove Documents from ADF The Favorite Copy button is set to Clone, Autofit, ID Card Copy or Poster and you press the button. The Clone, Autofit, ID Card Copy or Poster feature does not work with ADF. Remove the documents in the ADF. [Retry Redial?] (only for SCX4521F/ SCX4521FR) The machine is waiting for a specified time interval to redial a previously busy station. You can press Enter to immediately redial, or Stop/ Clear to cancel the redial operation. Scanner Locked The scanner module is locked. Upload the power cord and plug it back in. [Stop Pressed] The Stop/Clear button has been pressed during a copy or fax operation. Try again. [Toner Empty] The toner cartridge has run out. Replace the toner cartridge with a new one. See Remove Documents from ADF The Favorite Copy button is set to Clone, Autofit, ID Card Copy or Poster and you press the button. The Clone, Autofit, ID Card Copy or Poster feature does not work with ADF. Remove the documents in the ADF. [Retry Redial?] (only for SCX4521F/ SCX4521FR) The machine is waiting for a specified time interval to redial a previously busy station. You can press Enter to immediately redial, or Stop/ Clear to cancel the redial operation. Scanner Locked The scanner module is locked. Upload the power cord and plug it back in. [Stop Pressed] The Stop/Clear button has been pressed during a copy or fax operation. Try again. [Toner Empty] The toner cartridge has run out. Replace the toner cartridge with a new one. See ?$paratext>? on page 8.5. [Toner Low] The toner is almost empty. Take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing operations. See ?$paratext>? on page 8.5. Display Meaning Suggested solutions Solving Other Problems The following chart lists some conditions that may...
Other models in this manual:Printers - SCX-4321 (5.23 mb)
Printers - SCX-4521F (5.23 mb)
Printers - SCX-4521FG (5.23 mb)
Printers - SCX-4521FH (5.23 mb)