Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
In addition, some responses could collide and never reach SyncThru™ Admin 5. Broadcast method is suitable for: -searching a small network with few devices. -searching devices quickly. -searching a single subnet. •SLP : This method sends a single SLP request over the specific multicast address, 239.255.255.253, defined by RFC 2608. Only the devices which support the multicast IP address can respond to this request. SLP is similar to the Broadcast discovery except that it only looks for a specific device, which means that it does not generate as much network traffic and is less likely to lose device responses. SLP method is suitable for: -searching devices that support multicast broadcasts. -searching devices on a relatively small network. •IP Range : This method searches for the devices within a range of IP addresses. SyncThru™ Admin 5 can find devices on local or remote subnets. However, it can be slow on large networks because an IP Range discovery checks each IP address, including unused ones, to see if there is a device. In other words, it can cause directed traffic on large networks. IP Range method is suitable for: -searching devices on local and remote subnets. -running a discovery for specific IP Ranges with different schedules. -limiting the scope of discovery on the network. -searching multiple IP ranges •LDAP : This method requires your knowledge of LDAP and Active Directory domain. If you use LDAP discovery method, SyncThru™ Admin 5 scans the Active Directory or LDAP server for the printers using LDAP protocol. First, you have to configure LDAP server information in Settings menu > Settings > SyncThru Management > LDAP Servers. LDAP method is suitable for: -searching devices on LDAP servers including Active Directory. •CSV Import : This method searches the devices with the specified IP addresses. If you have a IP address list of your devices, you can use CSV Import for easy and efficient discovery. There is no unnecessary packet during discovery because SyncThru™ Admin 5 queries only to the specified IP addresses. CSV method is suitable for: -searching devices with a specific IP addresses list. -running a discovery for specific IP Ranges with different schedules. -limiting the scope of discovery on the network. •Local Devices : This method allows you to discover and manage devices that are directly connected to client machines on the network via USB connections. In order to discover locally connected devices, you need to enter credentials because administrator credentials are required to use WMI on the computers. Local device accounts and local device passwords are for this purpose. Enter the credentials of a domain user that has administrator privileges on the client computers. If the client computers respond, local device list is obtained through WMI. Supported discovery methods for local devices are: -IP Range -LDAP -CSV Import Local Devices method is suitable for: -detecting devices connected to the client machines. -obtaining deta...
Other models in this manual:Printers - CLX-6200FX (3.74 mb)
Printers - CLX-6200ND (3.74 mb)
Printers - CLX-6210FX (3.74 mb)
Printers - CLX-6210FXK (3.74 mb)