Votes - 5, Average rating: 3.4 ( )

Manafacture: Citizen File size: 604.48 kb File name: Language of manual:

*2: The ERROR LED may blink even in the execution of macro function. 4.7 When the Paper Cover Cannot Be Opened If the cutter blade remains protruded due to paper jam or for any abnormality, opening the paper cover may be disabled. In this case, do not open the paper cover forcibly. Insert a Phillips screwdriver (size #1) into the cutter lock releasing feed hole and turn it in the direction of arrow (clockwise). When you find that both ends of the blade reached the lowest position, stop turning the screwdriver. Open the cover and follow the procedure of removing jam or other cause of trouble. Cutter lock releasing feed hole Phillips screwdriver — 25 — — 26 — d D 65~150 4 4 4 4 5.2 Printing Paper Use the print paper shown in the following table or the paper with equivalent quality. Paper Type Product Name Recommended thermal F230AA, P220AG, HP220A, HP220AB-1, P220AB, P220AE-1, paper roll PB670 (Red/Black), PB770 (Blue/Black) from Mitsubishi Paper TF50KS-E2D from Nippon Paper PD150R, PD160R from Ohji Paper (Unit: mm) CAUTION! DO NOT use the following type of paper roll. ¦ Paper with folds. ¦ Paper with bent corners. ¦ Paper pasted or glued to the core. ¦ In-wound paper roll (print side in). (Unit: mm) 177 213 147 5. OTHER 5.1 External Views and Dimensions Paper width 112 Maximum print area 104 Maximum print area 82.5 .102 or less Printing surface Paper width 82.5 Paper width 80 Maximum print area 72 0 .1 0 .1 0 .1 Paper thickness (.m)* 65-75 75-150 Core inner diameter d (mm) .12 .25.4 Core outer diameter D (mm) .18 .32 *Thickness of label paper is the total of the thickness of “liner sheet” and “label”. When using “label paper” with CT-S4000L and CT-S4000DCL, refer to the following. Use the following paper or the equivalent paper. Paper type Product name Recommended thermal label paper 150LA-1 from Ricoh, GG40/P22/G6B from Ojitac, HD75 from Nippon Paper a) Label paper *L DLMBCAEFHIJKGFull cut position Paper feedingdirection Printable area Unit: mm Mark Item Dimensions A Liner width 58 to 112 0 -1 B Label width 54 to 108 + 0.5_ C Left edge of label 2 + 0.5 D Print width 50 to 104 E Top margin 2 + 1_ F Print length 21 to 296 G Bottom margin 2 + 1_ H Cut position between labels 1/2 x (Size I) I Gap between labels 4 to 30 J Label length 25 to 300 K Label pitch I+J L Left margin 2 + 1_ M Right margin 2 + 1_ CAUTION! Pay attention to the following when using Auto Cutter. Otherwise, a cutter lock or a cutter failure may occur. ¦ Set the cut length of paper to 25 mm or more. ¦ When using label paper, cut the gap between labels (liner sheet). Do not cut the label paper (tack paper). ¦ Adusting the paper sensor must be carried when the type of liner is changed. Label paper cannot be used with the model supporting blackmark (CT-S4000M/CTS4000DCM). — 27 — b) Black mark paper (BM paper) Black Mark (printed on the reverse) DBCAEFGCut position Paper feeding direction Printable area Unit: mm Mark Item Dimensions A Right edge of black mark 15 or more B Left edge of black mark 0 to 1.5 C Black mark height 5 D Cut position in black mark 2.5 E Top margin 6.5 / 12 F Black mark pitch 30 to 300 G Bottom margin 9 * In the case of the operation that the printer cuts the paper, the top margin will be changed by the setting of the memory switch 4-8. It is 6.5mm at 0 (OFF) and 12mm at 1(ON). * In the case of the operation that the printer does not cut the paper, the top margin is 6.5mm. CAUTION! ¦ PCS value of black mark must be 0.9 or more. ¦ When using the black mark paper, consider the margin of +/- 2 mm for the print position against the standard position and +/- 5 mm for print length. ¦ Refer to the above drawing for the printable area and have enough margings specified in the marks E and G. If the print data size is out of the printable area, the printer should skip to next page. — 28 — 5.3 Manual Setting of Memory Switch 5.3 Manual Setting of Memory Switch Memory switches can be set manually or by a command. For manual setting, refer to the next page. The function of each memory switch is shown in the following table. (The white-on-black characters are factory setting.) Switch No. Setting 0 (OFF) 1 (ON) Memory SW1-1 Power ON Info Valid Not send SW1-2 Buffer Size 4k bytes 45 bytes SW1-3 Busy Condition Full/Err Full SW1-4 Receive Error Print "?" No Print SW1-5 CR mode Ignored LF SW1-6 Reserved Fixed . SW1-7 DSR Signal Invalid Valid SW1-8 Init Signal Invalid Valid Memory SW2-1 Reserved .Fixed SW2-2 Auto Cutter Invalid Valid SW2-3 Spool Print Invalid Valid SW2-4 Full Col Print LineFeed WaitData SW2-5 Resume aft PE Next Top SW2-6 Reserved Fixed . SW2-7 Reserved Fixed . SW2-8 PNE Sensor Valid Invalid Memory SW3-1 Resum Cttr Err Valid Invalid SW3-2 Reserved Fixed . SW3-3 Parallel 31 Pin Valid Invalid SW3-4 Reserved Fixed . SW3-5 Reserved Fixed . SW3-6 Reserved Fixed . SW3-7 CBM1000 Mode Invalid Valid SW3-8 Resum Open Err Close Command Memory SW4-1 *M P. Length Set Auto Measure Command SW4-2 *M Power on TOF Invalid Valid SW4-3 Feed&Cut at...

Download now

Please, enter two numbers from picture: