Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Cursor w Cursor w Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Turn action Cursor Volume — Sample — Press action Tree View — DELETE LOAD LOAD ALL Knob 1 Same function as Cursor q (page 169). Knob 2 [ Turn] Volume Selects the volume containing the sample to be loaded. [Range] All volumes on the selected disk. • When a volume is selected the program list is updated to show all the programs in the selected volume. A5000/A4000 • Chapter 7 DISK Mode 169 DISK-SAMPLE Knob 3 — 5 Same function as Cursor q (page 169). When a sample with the same name as one being loaded exists in memory. If you attempt to load a sample (or sequence) that has the same name as one existing in memory, the following display will appear. The following functions are available from this display. • Processing Mode Turn this knob to select “One” or “All.” When One is selected and multiple samples are being loaded, this display will appear each time a sample (or sequence) with a duplicate name is loaded. When All is selected the same processing (the first processing applied) is applied to all samples with duplicate names. • Change the name of samples (or sequences) in memory. Press Knob 2 (RENAME) to add an asterisk (*) to the names of samples (or sequences) in memory which have the same names as those being loaded. • Do not load samples (or sequences) with duplicate names. Press Knob 3 (>SKIP). • Overwrite samples (or sequences) in memory with loaded samples (or sequences) having duplicate names. Press Knob 4 (>REPLACE). • Abort the load operation. Press Knob 5 (>ABORT). Data loaded prior to pressing the ABORT knob will remain in memory. 170 Chapter 7 DISK Mode • A5000/A4000 DISK-SEQUENCE 3. SEQUENCE SEQUENCE allows sequences to be loaded into the sampler’s memory from floppy disk, hard disk, or other media to which they have been saved. Press the [DISK] button and then the [F3] button to go to the SEQUENCE display. 1 display page is provided: SeqLoad (Sequence Load). SeqLoad [DISK] Button > [F3]Button > to select "DISK-SeqLoad" Use this page to load one or all sequences from disk. Cursor q Cursor q Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Turn action Cursor Disk — Sequence — Press action Tree View — DELETE LOAD LOAD ALL Knob 1 [ Turn] Cursor Positions the cursor. [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] Disk Selects the floppy disk, hard disk, or other storage media from which a sequence is to be loaded. When a disk is selected, all volumes it contains are listed below the disk name, and all sequences contained in the selected volume are listed on the right side of the display. When a hard disk, CD-ROM drive or similar storage device is selected, the SCSI ID number or IDE M/S (Master/Slave) status of the device is shown to the right of the disk name. [Range] All installed/connected disks. • If a connected SCSI or IDE device (hard disk, ZIP drive, etc.) cannot be selected, go to the disk select display (DISK-DISK-Disk) and check the mount/ unmount status and SCSI ID settings of the device (page 173). Knob 3 [ Press] DELETE Deletes the selected sequence from the disk. A confirmation display will appear when the knob is pressed. Press Knob 5 (>YES) to actually execute the delete operation. Knob 4 [ Turn] Sequence Selects the sequence to be loaded. Sequences cannot be selected if a non-native disk or a multi-segment floppy disk is selected. [Range] All sequences in the selected volume. [ Press] LOAD Initiates loading of the selected sequence. A confirmation display will appear when the knob is pressed. Press Knob 5 (>YES) to actually execute the load operation. If a sequence with the same name as one being loaded exists in memory a display allowing you to choose how to handle the situation will appear (see page 170). Knob 5 [ Press] LOAD ALL All sequences in the currently selected volume will be loaded. When the knob is pressed a confirmation display will appear. Press Knob 5 (>YES) to actually execute the load operation. If a sequence with the same name as one being loaded exists in memory a display allowing you to choose how to handle the situation will appear (see page 170). Cursor w Cursor w Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Turn action Cursor Volume — Sequence — Press action Tree View — DELETE LOAD LOAD ALL Knob 1 Same function as Cursor q (page 171). Knob 2 [ Turn] Volume Selects the volume containing the sequence to be loaded. [Range] All volumes on the selected disk. • When a volume is selected the sequence list is updated to show all the sequence in the selected vol ume. Knob 3 — 5 Same function as Cursor q (page 171). A5000/A4000 • Chapter 7 DISK Mode 171 DISK-VOLUME 4. VOLUME VOLUME allows selection and management of volumes on the currently selected disk. • See “7. DISK COMMANDS” on page 177 for more information on disks, partitions, and volumes. Press the ...
Other models in this manual:Musical Instruments - A5000 (9.2 mb)