Votes - 0, Average rating: 0
(
)
)
|
manual abstract
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies. • The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. This owner’s manual is applicable to both the A5000 Editor and the A4000 Editor (for both Windows and Macintosh). The screen illustrations are mainly taken from the A5000 Editor for Windows, although and differences between versions are explained. This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operation. If you are not,please refer to the owner’s manual which came with your Windows/Mac OS software before using A5000/A4000 Editor. For information about hardware requirements, the interconnection of devices and the installation of the A5000/A4000 Editor software, refer to the separate “Installation Manual” as well as the Owner’s Manual for the respective MIDI device. © 1999 Yamaha Corporation. All rights reserved. Introduction With A5000/A4000 Editor (hereafter referred to as Editor), you can edit your A5000/A4000’s programs, sample banks or samples via your computer. nEditor for Windows is a plug-in for XGworks(lite). To use Voice Editor for Windows, XGworks(lite) must be installed beforehand. Transmit/Receive bulk data or MIDI Cable parameter change data A5000/A4000 Memory ListWindow Program EditWindow/Sample EditWindow Program, sample bank or sample Set the effects parameters 2 Starting Up Starting Up If you have a A5000, you can start Editor by starting XGworks and choosing “A5000 Editor” from the “Plug-in” menu. If you have an A4000, choose “A4000 Editor” instead. n Set the MIDI Out port appropriately to send the edited data to the A5000/A4000 (Page 7). Macintosh n If you are using Voice Editor on a Macintosh computer, open the “Chooser” from the Apple menu and turn off “Apple Talk.” If you have an A5000, open the “A5000 Editor” folder in the “YAMAHA Voice Editor” folder and double-click the “A5000Editor” icon. If you have an A4000, open the “A4000 Editor” folder in the “YAMAHA Voice Editor” folder and double-click the “A4000Editor” icon. Menu Bar The Menu Bar holds various editing and setup functions/commands in its menus. Click each of the menu names to open their pull-down menu, and choose the function/command you wish to apply. Those functions/commands which are unavailable are grayed out. n The most commonly-used menus in the Menu Bar are available as buttons in Editor's toolbar. n To use Editor for Windows, refer to the documentation that came with XGworks(lite). File Macintosh Close (Macintosh only) Closes the window. This is the same as the “Close” box in the Title Bar. (Not effective for the Memory List Window.) 3 Edit Edit A5000/A4000 Editor Edit (Edit) This is the same as the “Edit Window” button in the toolbar (Page 7). 4 Setup (Windows) / MIDI (Macintosh) Windows Macintosh A5000/A4000 Editor Setup (Editor Setup) This is the same as the “Editor Setup” button in the toolbar (Page 7). A5000/A4000 Editor Receive Memory List (Receive Memory List) This is the same as the “Receive Memory List” button in the toolbar (Page 7). OMS Port Setup (Macintosh only) Opens the OMS Port Setup window for Editor. Refer to the section “OMS Port Setup” (Page 26) for further details. OMS MIDI Setup (Macintosh only) Opens the OMS MIDI Setup window. Refer to the documentation that came with OMS for further details. OMS Studio Setup (Macintosh only) Opens the OMS Studio Setup window. Refer to the documentation that came with OMS for further details. 5 The Memory List Window When you start Editor, you will first see the Memory List Window consisting of tabs, each representing the program, sample bank or sample in your A5000/A4000. When you choose to edit a program, sample bank or sample from the Memory List Window by double-clicking it, the Edit Window will be opened. 123 1 Toolbar This area holds the buttons controlling Editor (Page 7). 2 Tabs Click any of these to view the list of program, sample bank or sample. 3 List This area shows all the programs, sample banks or samples as a scrollable list. 6 The Toolbar (Memory List Window) 123 1 “Editor Setup” button Click this to open the “Editor Setup” dialog and specify the MIDI Out port settings. “Editor Setup” Dialog This is where you set up the Editor to allow the transmission of edited data to your A5000/A4000. Click the [OK] button to a...
Other models in this manual:Musical Instruments - A5000 (641.79 kb)