Votes - 2, Average rating: 4.5 ( )

Manafacture: Royal Sovereign File size: 1.41 mb File name: Language of manual:

Photos and specs  Royal Sovereign  RSH-1050

2. FUNCTIONS OF BUTTONS : Upper roller temperature controller : Lower roller temperature controller UPPER SPEED LOWER UPPER SPEED- 14 - : Speed controller : Choose memorized working condition : . Increase temperature . Increase speed . Restore the memorized working setting : . Decrease temperature . Decrease speed . Restore the memorized working setting : Cold and Hot mode change : Check current temperature : Saving electricity while the machine is not being operated. : Reverse function Stay pressing reverse button to have the roller run backward. : Stop working : Run the rollers. : Run and stop the fans :Count & Length Values Format :Change Into Count & Length Mode 3.HOW TO USE BUTTONS 1. Temperature available range from 0°C (32°F) Button & Display ***Set the upper/ lower hot rollers*** REV STOP RUN REV FAN COLD/HOT ST/BY REV STOP RUN T-CHECK UPPER LOWER SPEED MEMORY RESET FAN MEAS RESET MEAS C/HOT ST/BY T-CHECK SPEED MEMORY - 15 - to 160°C (320°F). 2. Temperature setting of upper roller Press and you will see the LCD screen is blinking 6 times. Before blinking is finished, press or to set the temperature 3. Set temperature of lower roller Press and choose the arrow button the same way to set temperature of upper roller. 4 Each time you press the button, it will change 1°C (2°F). If you press the button more than 1 seconds, temperature will change automatically until you press the button again. 5. Buzzer is ringing each time you press the button. 1. The operator can use 9 different lamination speeds. 2. Press button then speed display mode is blinking 6 times Before blinking finish, the operator can change the speed with or 3. Each time you press the button, buzzer will ring. 1) Memorize working condition Button & Display ***Speed controls the memorized working condition*** ***Memorizing Working condition and Using SPEED UPPER LOWER SPEED UPPER LOWER - 16 - 1.Operator can memorize 9 working conditions. 2.Choose working condition by pressing and button after pressing button. and speed, press button. 3.It is memorized if buzzer is ringing with blinking. * If you change the temperature or speed when LCD screen is still blinking, you have to press button after changing. 4.When you memorize another working condition, you can do above 2 and 3 operation over. 2) Use the memorized working condition. 1.Operator can choose one of 9 memorized working conditions. 2.Press then or to select a working condition. The display will blink. 3.After the blinking stops, it is set the working condition you selected and shows the working condition on the display. 1.When you press button, the present temperature will be shown on the screen and will ***Check current temperature on the hot rollers.*** UPPER LOWER SPEED MEMORY MEMORY MEMORY MEMORY MEMOR MEMORY T-CHECK - 17 - blink five times. 2.After this, it automatically returns to the previous state. 1.You can do cold lamination with this function. 2.Press the button to show "Cold" on the display. 3.Speed will always show 2. 4.Speed can be varied 1 or 4 by selecting button. 5.You release the machine from cold mode by pressing button. 6.Everytime you press the button, buzzer is ringing 7.ST/BY mode is not working at COLD mode. 1. When press button will display on the screen and STND-BY mode is set at 80C. 2. When machine is in mode, machine ***STND-BY (Saving Electricity while you are not operating for a while)*** ***Cold mode*** T-CHECK C/HOT SPEED C/HOT MEMORY ST/BY ST/BY C/HOT - 18 - condition wouldn’t work. Press the button and it will revert to the previous working. 3. When machine runs, you can’t change it to the mode. In this case, press the button and turn the machine to the mode. 1. When press button the present numbers of length and papers laminated will be shown on the screen. 2. When you want to return to working mode Press button again. 3.Also, you can reset measure mode by pressing button.(for 2 second) 1. HOT LAMINATING 1. Turn the power switch on the back side of the machine. (Emergency Switch must be turned off) ***Check the laminating length & How many laminated papers*** LAMINATING STEPS ST/BY ST/BY STOP RESET FAN MEAS MEAS RESET MEAS - 19 - 2. Set the pressure lever to the “Laminating mode” 3. Increase roller temperature. If you already memorized special working condition, MEMORYpress button and choose right condition by using or button. 4. When it’s ready, you will see ready sign on the screen and the buzzer will ring. 5. Press the RUN button. If rollers don’t run, check the emergency switch whether it is located at “ON” position or not. 6. To set film tension properly, use the Tension Control Knob. Lower tension would make better operation. 7. Set document on the table. You should allow at least 5mm(1/4”) space on each side for perfect laminations. 8. Press the STOP button when your lamination is finished. 9. For your convenience, it would be better to set table guide in proper position. 10. When lamination is just finished, it is hot and easily bent. Try not ...

Download now

Please, enter two numbers from picture: