Login:
Votes - 3, Average rating: 4.3 ( )

User manual Blodgett, model ZET938

Manafacture: Blodgett
File size: 2.47 mb
File name:
Language of manual:enesfr
Free link for this manual available at the bottom of the page



manual abstract


Remove the broiler pan, broiler grid, probe, all cookware and any aluminum foil from the oven. Gray porcelain-coated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle without being damaged. The nickel-plated oven racks (including the offset rack) may remain in the oven during the self- cleaning cycle, but they will darken and become hard to slide. Do not use abrasives or oven cleaners. Clean the top, sides and outside of the oven door with soap and water. Make sure the oven light bulb cover (on some models) is in place and the oven light is off. IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room. CAUTION: Never place cooking utensils or any other items on the oven floor. There is a heating element beneath the oven floor. Placing items on the oven floor may cause the oven to overheat, resulting in damage to the oven and risk of damage or fire to cabinets. Wipe up heavy soil on the oven bottom. (Appearance may vary.) On double oven models, you can set a clean cycle in both ovens at the same time. The last oven set will automatically delay its start until the end of the first oven’s clean cycle. On double oven models, you can use timed baking in one oven and self-clean the other at the same time. How to set the oven for cleaning 1 Press the SELF CLEAN STD/LOW pad once for a 4-hour clean time or twice for a 3-hour clean time. A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven. 2 If a time other than 4 hours or 3 hours is needed, use the number pads and enter the desired clean time. You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is. 3 Press the START pad. The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off. When the LOCKED light goes off, you will be able to open the door. • The word “LOCK” will flash and the oven control will signal if you set the clean cycle and forget to close the oven door. • To stop a clean cycle, press the CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door. Using the Self-Cleaning Oven Wall Oven How to delay the start of cleaning 1 Press the SELF CLEAN STD/LOW pad once for a 4-hour clean time or twice for a 3-hour clean time. A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven. 2 If a time other than 4 hours or 3 hours is needed, use the number pads and enter the desired clean time. You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is. 3 Press the DELAY START pad. 4 Using the number pads, enter the time of day you want the clean cycle to start. 5 Press the START pad. The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off. When the LOCKED light goes off, you will be able to open the door. NOTE: On double oven models, you can set a delay clean in both ovens at the same time. The second oven set will automatically delay the start of cleaning until the end of the first oven’s clean cycle. To recall the start time of the second oven set, press the DELAY START pad on the controls for the second oven. After a clean cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. • You cannot set the oven for cooking until the oven is cool enough for the door to unlock. • While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the SELF CLEAN STD/LOW pad. • If the racks become hard to slide, wipe the rack supports with cooking oil. Special Features Wall Oven Special features of your oven control Your new touch pad control has additional features that you may choose to use. They remain in the control’s memory until the steps are repeated. When the display shows your choice, press the START pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset. The special feature modes can only be activated while the display is showing the time of day clock. The following are the features and how you ...

Other models in this manual:
Electric Ovens - ZEK958 (2.47 mb)
Electric Ovens - ZET958 (2.47 mb)
Electric Ovens - ZET938 (2.47 mb)
Electric Ovens - ZEK938 (2.47 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category