3 FEATURE GUIDE (FIG. 1-4) ..................................................................................................... 3 SAFETY ADVICE........................................................................................................................ 5 EMI Warning ................................................................................................................................6 ADJUSTMENTS................................................................................

The battery chargers for the Sunrunner™ 3 and Sunrunner™ 4 are 3-amp transformer type off board chargers. The battery chargers for the Sunrunner™ 3 Deluxe and Sunrunner™ 4 Deluxe are 4-amp transformer type on board chargers. Charging To charge the batteries connect the plug lead into the battery-charging socket on the scooter/battery pack and the 3-prong plug into the wall socket and switch on. FOR Sunrunner™ 3 and Sunrunner™ 4 ONLY: the battery charger has two lights. The red light when constan

NOTE! There is no easy way to evaluate the overall immunity of the scooter. 5. Report all incidents of unintended movement or braking to your Shoprider® provider, and note whether there are sources of EMI nearby. WARNING: Shoprider® Mobility Products is not responsible for damage or injury incurred due to improper and unsafe use of our scooter. 5/11/2004 6 ADJUSTMENTS Tiller Angle Adjustment (Fig. 5A&B) On the left hand side at the base of the tiller is a red lever/black knob. Push/pull the leve

• Mount the scooter, either by lifting the arm and sliding on to the seat or rotate the seat outwards and then rotate the seat back to face the tiller. • Adjust the tiller and seat as described previously. Starting Scooter Movement • Ensure that you are seated in a comfortable position. • Turn the key to the ON position. 5/11/2004 10 • Your speed setting should be on 1 or 2. • Pull your right hand finger lever, the scooter will move forward slowly. The harder you pull the faster the scooter goes

From basic to fully modular systems,the Tarsys Series features advanced technology to provide the functionality and versatility you have come to expect from Invacare products. Basic Powered Seating: Products designed for consumers whose seating needs can be satisfied with a basic tilt system. These individuals are not expected to have the future requirement of power recline, powered elevating legrests, or a ventilator tray. • The Invacare Tarsys Power Tilt Only (PTO) system provides a simple,ele

Tilt-in-Space Wheelchair nvacare took the best the Solara™ had to offer and built it into a size that’s perfect for pediatric consumers. The Solara™ jr. is special because it keeps the consumer’s center of gravity almost perfectly stationary throughout the entire 50° tilt range.This gives the Solara jr. a compact wheelbase while maintaining excellent stability, providing comfort and security for the pediatric consumer. And it can help decrease startle reflex, since the consumer is tilted into t

INSTALLATION WARNING After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely. . . . ! " # $ . SAVE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer/Carrier for further instructions. SAFETY SUMMARY The following recommendations are made for safe installation of the Solid Seat. GENERAL WARNINGS ADULT/HEMI REMOVABLE ARM WHEELC

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and cause severe injury to the wheelchair user or others. Chair Basics English CHAIR BASICS A. TO FOLD & UNFOLD CHAIR WARNING NEVER let your fingers come between the seat rail and the frame rail when you open or fold this chair. This may cause a pinch or crush-type injury. 1. To Fold Chair: a. Remove back insert (if any). b. Make sure footrests are out of the way before you fold chair. (Swing a

Contact Carrier/ Dealer for further instruction. SAFETY SUMMARY The following recommendations are made for safe installation and adjustment of the Patient Operated Wheel Locks: 3. Remove the existing tube clamp from the wheelchair frame. 4. Install the plug button into end of the NEW pivot arm assembly. 5. Insert the NEW strap and stud assembly through the pivot arm assembly and secure with locknut. 6. Install the NEW tube clamp over the frame and DO NOT install or use this kit without first rea

1300, 1035965, and 1035966 NOTE: Check all parts for shipping damage and test before using. In case of damage, DO NOT use. Contact the dealer/Invacare for further instructions. SAFETY SUMMARY The following recommendations are made for the safe installation of the Wheelchair Tray: WARNING DO NOT assemble or use this equipment without first reading and understanding this instruction sheet. If you are unable to understand the Warnings, Cautions or Instructions, contact a healthcare professiona