Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 2   File size: 2 mb   Manafacture: Summit  
Category: Mobility Aid
@name

F. Main Circuit Breaker: The main circuit breaker is a reset button located on the front battery box with 2 connectors (Fig. 16). The main circuit breaker monitors the electric current drawn from the batteries. It is a safety feature built in your power wheelchair for your extra safety. When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker will trip to prevent damage to the motors and the electronics. If the circuit breaker trips, wait for

downloaded: 0   File size: 2 mb   Manafacture: Summit  
Category: Mobility Aid
@name

as an average. Please seek help if you cannot lift them by yourself. Put the batteries into the battery boxes. Using the screws, washers, and nuts provided from the battery supplier, connect the red line to the Positive (+) terminal of a battery while connecting the black line to the Negative ( ) terminal of the same battery (Fig. 2). Close the box properly and carry it with the strap. Apply the same connecting method to both batteries. Fold down the battery bars on each side of the frame so tha

downloaded: 0   File size: 2 mb   Manafacture: Summit  
Category: Mobility Aid
@name

We hope that it will provide many years of mobility for you. This is a general manual for our power wheelchairs, HP-1, HP-1L, and HP-1S. The information in this manual applies to all these models. HP-1 is a power wheelchair with seat width of 18”, HP-1L with 20” seat width and HP-1S with 16” seat width. We use “HP-1” or “power wheelchair” to refer to all these models in this manual. Your Summit power mobility product HP-1, HP1L and HP-1S were designed with three basic objectives in mind: value,





Category