3. Remove accumulated debris from the hydro fan cooling guards. Clean Debris From Machine Service Interval: Before each use or daily 1. Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake. 2. Clean off any oil, debris, or grass build-up on the machine and cutting deck, especially under deck belt shields, around the fuel tank, around engine and exhaust area. Clean Grass Build-Up UnderDeck Service Interval: Before each use or daily 1. Stop engine, wait for all movi

Checks before each operation: Before use, an inspection is always to be performed In order to determine that all nuts, bolts and working tools are not worn down or damaged. Worn down or damaged blades are to be replaced in sets. Inspect the surface on which the lawn mower is to be used be-forehand. Stones, pieces of wood and wires as well as other solid matter are to be removed. Objects, which are contacted bythe cutting tools, could be thrown out uncontrollably. Proper use / Responsibility Warn

Cassillas 272 Centro de Cassillas Santiago de Chile Phone:(+56) 22010708 garfar_cl@yahoo.com Costa Rica Compania Exim Euroiberoamericana S.A. Los Colegios, Moravia, 200 metros al Sur del Colegio Saint Francis - San Jose Phone: (+506) 2976883 exim_euro@racsa.co.cr Croatia KLIS d.o.o. Stanciceva 79 10419 Vukovina Phone: (+385) 1 6227770 gardena@klis-trgovina.hr Cyprus FARMOKIPIKI LTD P.O. Box 7098 74, Digeni Akrita Ave. 1641 Nicosia Phone:(+357) 22754762 condam@spidernet.com.cy Czech Republic GARD

790,000&HigherPartNo.4500-370Rev.A Exmark reserves the right to make changes oradd improvements to its products at any timewithout incurring any obligation to make suchchanges to products manufactured previously. Exmark, or its distributors and dealers, acceptno responsibility for variations which may beevident in the actual specifications of its productsand the statements and descriptions containedin this publication. © 2009—Exmark Mfg. Co., Inc.Contact us at Industrial Park Box 808 Printed in

assembly includes (1) whizlock nut. Item #48. ❖ Fill gearbox sections to drain/fill plug with Mobil SHC (synthetic) 75w-90 gear lube oil. 4 DECK GROUP TORQUE TO 13 80-100 IN-LBS (ITEM 13) -11 TORQUE TO 11 85-110 FT-LBS (ITEM 11) 5 FRONT FRAME GROUP Item Part No. Description Qty. 27 103-8797 Decal, Folding Deck.......................... ....2 28 103-8798 Decal, Danger................................... ....1 29 103-8799 Decal, Spring.................................... ....2 30 302-19

790,000 & Higher Part No. 4500-485 Rev. D Parts Manual EXMARK PARTS PLUS PARTS_ OVER NIC HT m —"«f If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE Guaranteed!! (Some restrictions apply. See your participating Exmark Dealer for details.) -1- Awarning READ OPERATOR’S MANUAL BEFORE OPERATING OR SERVICING EXMARK EQUIPMENT. TABLE OF CONTENTS Description Page Brake Handle Assembly.........

• Do Not change the engine governor setting or overspeed the engine. • Stop engine, wait for all moving parts to stop, remove key and engage parking brake: – Before checking, cleaning or working on the mower. – After striking a foreign object or abnormal vibration occurs (inspect the mower for damage and make repairs before restarting and operating the mower). – Before clearing blockages. – Whenever you leave the mower. • Stop engine, wait for all moving parts to stop, and engage parking brake:

9. Fix the motor cable 0 to the upright with the two cable clips A. Warning! Short-circuit – fire risk ! AV Accu-contacts should never be bridged with metal! The Accu is supplied charged at the factory but may lose charge if it has been stored for a long time. Charge the Accu before using it for the first time (see 7. Maintenance Charging the Accu). 1. Press Accu cover C lightly at the front and open. 2. Insert the Accu D into the Accu compartment with the connections pointing towards the flat p

(42”)..........2 109-0323 Asm, Rear Deck Height Adj. (48”)..........2 20 103-9485 Asm, Drive Shaft W/Decal .....................1 103-9327 Asm, Cross "U" Joint .............................2 103-9328 Yoke, Keyed ..........................................1 103-9329 Yoke, Quick Disconnect.........................1 21 103-4230 Spacer, Roller ........................................2 22 103-4974 Hinge .....................................................1 23 103-5868-01 Wld, Spring Mount ...........

Deck Flip-Up 1 4 100 hours 4. Push Arm Tubes 1 2 100 hours 5. Caster Pivots *0 3 *yearly . See Section 4.2.5 c) for special lubrication instructions on the front caster pivots and Section 5.2.6 for special lubrication instructions on the rear caster wheel hub. c) Lubricate caster pivots once a year. Remove hex plug and cap. Thread grease zerk in hole and pump with grease until it oozes out around top bearing. Remove grease zerk and thread plug back in. Place cap back on. 4.2.6 Lubricate caster w