Votes - 4, Average rating: 4.5 ( )

Manafacture: Exmark File size: 196.65 kb File name: f10f2d2b-681b-454b-ac14-c6dca38f0a55.pdf Language of manual:

9. Fix the motor cable 0 to the upright with the two cable clips A. Warning! Short-circuit – fire risk ! AV Accu-contacts should never be bridged with metal! The Accu is supplied charged at the factory but may lose charge if it has been stored for a long time. Charge the Accu before using it for the first time (see 7. Maintenance Charging the Accu). 1. Press Accu cover C lightly at the front and open. 2. Insert the Accu D into the Accu compartment with the connections pointing towards the flat plugs E. Warning ! A The polarity +/- and the colours of the connections on the Accu and the flat cable must match. V Connect flat cable E to the Accu connections, matching the terminals (see adhesive label on the Accu). 1. Secure Accu D with the retaining strap F. 2. Close Accu cover C. 4. Function Mowing correctly: 5. Operation To produce a well-maintained lawn we recommend cutting the lawn one a week if possible. The lawn becomes thicker if cut frequently. Relatively long cut grass (> 1 cm) must be removed so that the lawn does not become yellow and matted. After relatively long intervals between mowing (holiday lawn), up to max. 12 cm, first of all cut in one direction with the cutting height as high as possible, then cut in the crosswise direction at the cutting height required. If possible, only cut the grass when it is dry, if the grass is damp, the cutting pattern will be uneven. The area of lawn you can mow with one charged accu depends on the height and thickness of the lawn, i.e. the taller and thicker the lawn, the smaller the area of lawn you can mow with one fully charged Accu. GB Starting the cylinder mower: Risk of injury if the cylinder mower does not switch off automatically! V Do not remove or bypass safety devices on the cylinder mower (e.g. by tying the starting handle to the upper part of the upright)! A A Danger! Blade cylinder continues to turn after switching off! V Never lift, tilt or carry the cylinder mower with the motor running! V Never start the mower on a paved surface (e. g. asphalt). V Always maintain the safety distance between the blade cylinder and the user set by the guide handle. 1. Stand the cylinder mower on a level part of the lawn. 2. Insert the key G into the charging socket H. 3. Keep safety interlock B pressed down and pull the starting handle I on the upper handle 9. The cylinder mower starts and the charge display lights up for 10 seconds. 4. Release starter safety lock B. If the red LED (Accu flat) goes on, the Accu must be charged. The Accu cover must always be kept closed during mowing. The Accu becomes warm when using the cylinder mower. This is normal and does not impair its performance. Blockage protection: If the cylinder mower is blocked by a foreign body or the motor is overloaded (red Error-LED lights up), the motor is automatically switched off by the blockage protection (loud rattling). Remove key from socket, remove foreign body or rectify the cause of the overloading and restart the mower after a...

Download now

Please, enter two numbers from picture: