Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 5   File size: 61 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

It is for household use and may be plugged into any AC electrical outlet (ordinary household current). Do not use any other electrical outlet. HOW ESP/ALCI WORKS The ESP/ALCI safety device in this unit is built into the plug. This device will make it inoperable under some abnormal conditions, such as accidental immersion in water. If the appliance is immersed in water, do not attempt to reset the ESP/ALCI safety device. Please take the unit to the nearest service facility for examination. The ES

downloaded: 20   File size: 37 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

At any time, should this unit detect an electrical shock hazard, it will immediately shut off. To restore power, the reset button on the ALCI safety device must be pressed to reactivate the circuit. CAUTION: Heating section should never be touched as it may be hot and burns may occur. To avoid possible scalp or hair burns, use very hot setting only when hair is wet. Reduce to lower heat as hair dries. Do not keep appliance directed at one place; keep it in constant motion. This is especially imp

downloaded: 27   File size: 71 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

or sink. n No coloque ni guarde el aparato donde se pueda caer o ser arrojado n Do not place in or drop into water or other liquid. en la tina o lavamanos. n If an appliance falls into water, "unplug it" immediately. Do not reach n No lo coloque ni lo tire dentro del agua u otra clase de liquidos. into the water. n Si un aparato electrico cae dentro del agua, “desenchufelo” WARNING - To reduce the risk of burns, electrocution, fire, or injury inmediatamente. No introduzca la mano en el agua. to

downloaded: 7   File size: 94 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

The ESP/ALCI safety device is equipped with a test button so that its operation can be checked. TO USE (See Fig. A): 1. Press the reset button on the ESP /ALCI safety device. 2. Plug appliance into AC electrical outlet. 3. Then press the test button. The reset button will pop out. This verifies that the safety device is operating properly. Should the reset button not pop out, do not use the unit. Return immediately for service. 4. Press the reset button to re-activate the ESP /ALCI safety device

downloaded: 53   File size: 63 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

If the appliance is immersed in water, do not attempt to reset the ALCI safety device. Please take the unit to the nearest service facility for examination. The ALCI safety device is equipped with a test button so that its operation can be checked. TO USE: 1. Press the reset button on the ALCI safety device. 2. Plug appliance into AC electrical outlet. 3. Then press the test button. The reset button will pop out. This verifies the safety device is operating properly. Should the reset button not

downloaded: 5   File size: 46 kb   Manafacture: Belson  
Category: Hair Dryers
@name@name

Return immediately for service. 4. Press the reset button to reactivate the ESP/ALCI safety device and use the appliance. At any time, should this unit detect an electrical shock hazard, it will immediately shut off. To restore power, the reset button on the ESP/ALCI safety device must be pressed to reactivate the circuit. Repeat the above procedure each time this appliance is used to confirm that the safety device is operational. IMPORTANT: Never block air intake grille, as this will cause the





Category