2 Servicing the Clutch Mechanism- Servicing the Clutch Mechanism- . Grease / Lubrication — when assembling the internal clutch component parts: the Clutch Discs (fig. nos. 5 and 6), Thrust Washers (fig. no. 4) and Disc Springs (fig. no. 8) are to be lightly coated with grease (Cat. No. 49-08-4220 type ‘J’) during their assembly into the spindle gear. Grease / Lubrication specification includes coating internal bore of the spindle gear. 4 45-88-1140 Thrust Washers (2) 5 43-06-0160 Clutch Discs-Ou

Le non- respect, meme partiel, des instructions ci-apres entraine un risque de choc electrique, d’incendie et/ou de blessures graves. CONSERVEZ CES INSTRUCTIONS. AIRE DE TRAVAIL Veillez a ce que l’aire de travail soit propre et bien eclairee. Le desordre et le manque de lumiere favorisent les accidents. N’utilisez pas d’outils electriques dans une atmosphere explosive, par exemple en presence de liquides, de gaz ou de poussieres inflammables. Les outils electriques creent des etincelles qui pour

1-800-4-DEWALT • INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO INSTRUCTION MANUAL Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTEINSTRUCTIVO ANTES DE USAR EL PRODUCTO. GUIDE D'UTILISATIONMANUAL DE INSTRUCCIONES D21002, D21007, D21008, D21009, DWD110, DWD112, DWD115 3/8" (10 mm) V.S.R. Drill Perceuse de 10 mm (3/8 po) a regulateur de vitesse et inverseur de marche Taladro de 10 mm (3/8 pulg.) V.V.R. DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (AUG07) Form No. 655014-00 D210

Then, when the drill reads level, the two will be aligned. (Any bubble level can only indicate level to the earth’s surface). NOTE: The fluid in the bubble level vial is mineral spirits. If the mineral spirits gets into your eyes, flush eyes with water. If irritation occurs, seek medical attention. If the vial fluid comes into contact with your skin, remove contaminated clothing and remove excess fluid. Rinse thoroughly with water followed by washing with soap and water. If irritation occurs, se

All users and bystanders must wear eye protection that conforms to ANSI Z87.1. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects, or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber (CCA). Your risk from these ex

There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable