Votes - 2, Average rating: 3
(
)
)
|
Other manuals for this model:
manual abstract
Distance between Df and Dc Delay Time Delay Time 1.3 ms 2.6 ms 3.9 ms 5.3 ms Distance between Ds and Dc 50 100 150 200 200 400 600 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 50 Setting the Audio Quality You can adjust the balance and level for each speaker. 45 21 43 Press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button. Press Cursor , , , buttons to select the desired item and then press ENTER button. Method 1 When adjusting the audio quality using the setup screen Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB. • The sound gets louder as you move closer to +6dB and smaller as you get closer to -6dB. Method 2 When manually adjusting with the SOUND EDIT button 1 2 Adjusting Front Speaker Balance Adjusting Rear Speaker Balance Press SOUND EDIT button and then press Cursor , . 3 Adjusting Center Speaker Level 4 5 Adjusting Rear Speaker Level Adjusting Subwoofer Speaker Level 46 Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Note SETUP TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 51 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 52 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 47 1 2Press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 53 3 3 Press Cursor button to move to ‘DRC’ and then press ENTER button. 4 4 Press Cursor , to adjust the ‘DRC’. • The longer the Cursor button is held down, the greater the effect, and the longer Cursor button is held down, the smaller the effect. SETUP Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 48 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 54 Auto Sound Calibration Setup * This function is available only for DVD/CD playback. Auto Sound Calibration By setting the auto sound calibration function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create 5.1-channel sound field optimized for the listener's environment. L: Front Speaker (L) R: Front Speaker (R) C: Center Speaker SW: Subwoofer LS: Rear Speaker (L) RS: Rear Speaker (R) * The following images are for illustrative purposes only and may differ from the actual product. • If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without connecting the auto sound calibration microphone will display the message "PLEASE SET ASC FUNCTION FIRST" in the display. • Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume using the volume control buttons. • If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled. Auto Sound Calibration Microphone Note 49 • Each time the button is pressed, the selection alternates between S.LOGO ON and S.LOGO OFF. • If you select "S.LOGO ON", a sound logo will be output when the disc reading is finished after power-on. If you select "S.LOGO OFF", no sound logo will be output. To Turn On or Off Sound Logo Press and hold ASC button. Briefly press ASC button. 1 2 • Distance and level values specified for each channel will appear in the display. Press and hold ASC button twice. Briefly press ASC button. 1 2 When you turn on the power, the unit produces a sound logo after the disc reading to notify that the unit is optimized for playback. To Verify the Auto Sound Calibration 31P~68P(DB1350)-GB 2/16/04 5:49 PM Page 55 1 1 Plug the auto sound calibration microphone into the auto sound calibration input jack. 2 2 Place the auto sound calibration microphone at the listener's position. 3 3 Adjust the volume control on the main unit as follows: • If the distance between the listener and the speaker is over 5 m: Set the main unit's volume to over 25. • If the distance between the listener and the speaker is 3 to 5 m: Set the main unit's volume to...