Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 15   File size: 662 kb   Manafacture: Aussie  
Category: Convection Ovens
@name

· Make sure there are no sharp bends in the hose or tubing. · Make sure Regulator Hose does not contact hot metal surfaces. 25 · Never connect or disconnect LP gas cylinder or fittings while grill is in use or is hot. · When the LP gas cylinder is connected, the grill must be kept outside in a well-ventilated space. Turn off all of the grill control knobs and the LP cylinder valve when grill is not in use. · Move gas hose as far away as possible from hot surfaces. How to Connect your LP gas cyli

downloaded: 5   File size: 212 kb   Manafacture: Aussie  
Category: Convection Ovens
@name

STARTING A FIRE To reduce the risk of hood catching fire and flame-up: · Make certain you leave the Hood all the way open until the flames have died down. · Should electrically operated starters be used, be sure they are properly grounded according to local codes. Electrical cords should be placed away from walkways or traffic areas. · Do not use lighter fluid, an electric fire starter solid, or chimney starters with instant light charcoal. This could cause flame-ups, unpleasant fumes and odors.

downloaded: 70   File size: 2 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

Do not add more instant light briquettes once the fire has been lit. Add regular charcoal briquettes if more are needed. 9. Once the barbecue grill has been lit, do not touch the charcoal briquettes/wood chunks to see if they are hot. Do not close hood until ready to cook. 10. Allow coals to burn out completely and let the ashes cool for 48 hours before disposing of them. 11. Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a non-combustible container. Be

downloaded: 2   File size: 662 kb   Manafacture: Aussie  
Category: Convection Ovens
@name

Lighting the Grill Using the Integra- Spark Ignition System · Open Lid or Hood (depending on the model) before lighting the grill to prevent an explosion from gas build-up. · The Lid (KangaTM series only) must never cover the cooking surface while the LP gas grill is in use or hot. · Always inspect the gas hose and regulator assembly before each use. If the hose is cut, damaged, or shows signs of excessive abrasion or wear, do not use the LP gas grill. Contact the manufacturer, as the hose and r

downloaded: 7   File size: 2 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories? Visit us online at Or call Aussie Customer Service at 1 800 251 7558 WARNING ! DANGER ! • Failure to follow these intructions could result in fire or explosion which could cause death, serious personal injury, or property damage. • Read and follow instructions carefully before assembly or use. • Do not use this product for any other purpose than which it is intended. • These instructions must be kept with the user. S

downloaded: 3   File size: 662 kb   Manafacture: Aussie  
Category: Convection Ovens
@name

•Handle the Grill Body carefully to protect the Body finish. ASSEMBLY CONTINUED NEXT PAGE. GRILL BODY BOTTOM BODY PANEL 14 STEP 6-(CONTINUED) ASSEMBLE GRILL BODY TO CART- KANGA MODELS •Turn Grill Body upside down and position between cart legs with the Hose and Regulator on the Wheel Leg end. Do not lay Grill Body on, or step on, the Hose and Regulator. •Align slotted holes on sides of Grill Body with CASTER LOCK 6mm X 110mm BOLT 6mm X 110mm BOLT SPACER WINGNUT BODY holes through edges of legs (

downloaded: 0   File size: 2 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

The Burner can also be lit manually, see Manual Lighting of the Grill on page 28. Manually Lighting the Grill ! WARNING To reduce the risk of serious bodily injury or death from fire or explosion: • Open Hood before lighting the grill to prevent an explosion from gas build-up. 1. Open the Hood. 2. IMPORTANT: Make sure Control Knobs are turned “Off.” (Fig. 4 - P.27) 3. Turn the LP Gas Cylinder valve open counterclockwise until it stops. (Fig. 5- P.27) 4. Locate match-lighting hole at the right en

downloaded: 10   File size: 1 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

NOT FOR COMMERCIAL USE. • Failure to follow these instructions could result in fire or explosion which could cause death, serious personal injury, or property damage. • Read and follow instructions carefully before assembly or use. • Do not use this product for any other purpose than which it is intended. • These instructions must be kept with the user. SAVE THESE INSTRUCTIONS. If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, ke

downloaded: 4   File size: 2 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

Remove Grill and all the packaging from carton and place on floor. Make sure there are no loose parts. NOTE: Before using your grill, read the instructions and your manual. For easier set-up and assembly, follow instructions of each step in the order they are written as you look at the diagrams. If accessories mentioned in certain assembly steps do not come with your model, skip that step and proceed to the next step that applies to your model. If you have any questions or need help, contact Cus

downloaded: 0   File size: 1 mb   Manafacture: Aussie  
Category: Convection Ovens
@name

(FIG. 5B) Hold spacers between leg and body and insert M6 x 90 bolt through leg, spacer, and slotted hole in Grill body. Attach M6 Wingnut, but do not tighten. Repeat assembly for three remaining legs. • With the help of a second person, lift the Grill into the upright position. Grill body should slide down into slotted holes and seat itself. If not, loosen the wingnuts and push down on the corners of the body. • Tighten all bolts and wingnuts. Also tighten all Bottom Shelf and Side Table bolts.





Category