Votes - 3, Average rating: 4 ( )

Manafacture: Brinkmann File size: 13.08 mb File name: Language of manual:

Always keep your gas grill free and clear of gasoline, lighter fluid, paint thinner, or other flammable vapors and liquids or combustible materials. Always check the grill prior to each use as indicated in the "Pre-Start Check List" section of this manual. Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. DO NOT use back rotisserie burner when main burners are in use. DO NOT obstruct the flow of combustion or ventilation air. Never place more than 15 pounds on the side burner. DO NOT lean on the side burner shelf. Keep children and pets away from hot grill. DO NOT allow children to use or play near this grill. DO NOT leave the grill unattended while in use. DO NOT allow the gas hose to come in contact with hot surfaces. DO NOT allow grease from drain hole to fall on hose. Keep any electrical supply cords away from water or heated surfaces. Keep a fire extinguisher on hand acceptable for use with gas products. Refer to your local authority to determine proper size and type. For household use only. DO NOT use this grill for anything other than its intended purpose. DO NOT use while under the influence of drugs or alcohol. Grill is hot when in use. To avoid burns: • DO NOT attempt to move the grill. • Lock the wheels so the unit does not accidentally move. • Wear protective gloves or oven mitts. • DO NOT touch any hot grill surfaces. • DO NOT wear loose clothing or allow hair to come in contact with grill. USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL. FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE. SAVE THIS MANUAL FOR FUTURE REFERENCE. ASSEMBLY INSTRUCTIONS YOU MUST BE A PROFESSIONAL SERVICE TECHNICIAN TO CONVERT THIS GRILL. READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING THE CONVERTED GRILL. The following tools are required to assemble the Conversion Kit: • Phillips Head Screwdriver • Adjustable Wrench • 3/4” Wrench PARTS CONTENTS 1.32mm 8530/8532/8550/8552/8555 Rotisserie Burner 1.32mm Valve Orifice x 1 Pc (YELLOW) Large Stop Plate x 6 Pcs. Small Stop Plate x 1 Pc. Gas Orifice Tool Small Wrench 10’ Natural Gas Hose Large Wrench 1.25mm 8905/8907 SIde Burner 1.25mm Valve Orifice x 2 Pc (GREEN) 8750/8752 Side Burner 1.35mm Valve Orifice x 2 Pc (RED) 1.35mm 1.51mm 8905/8907 Rotisserie Burner 1.51mm Valve Orifice x 1 Pc (BLUE) LS (Proof of purchase will be required.) Inspect contents of the box to ensure all parts are included and undamaged. FOR GRILL WARRANTY REPLACEMENT PARTS, PLEASE VISIT US AT: 5 CAUTION: Some parts may contain sharp edges.Wear protective gloves if necessary. WARNING: Only use the specific orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty. Note: Make sure all control knobs are in the off position, LP tank valve is closed and tank is disconnected from regulator and removed from grill. Step 1 Hold the gas manifold connection with an adjustable wrench and use a 3/4” wrench to undo LP hose connection from gas manifold. Step 2 Attach 10’ hose to gas manifold. Tighten connection carefully using two wrenches. Take the end of the 10’ hose and place it through the cart back panel exit. Step 3 Open hood and remove warming rack, cooking grills and heat shields. Set aside for later use. CONVERSION INSTRUCTIONS 810-8905-S & 810-8907-S Warming Rack Cooking Grills Heat Shields 10’ Natural Gas Hose Gas Manifold Connection Back Panel Exit 6 Step 4 Remove two screws from each burner "foot" using a screwdriver. Remove wood chip drawer to get access to the wood chip burner. Remove one screw from the wood chip burner. Carefully lift each burner up and away from valve openings. Set aside for later use. Step 5 Using the gas orifice tool, remove the LP brass orifi...

Download now

Please, enter two numbers from picture: