Login:
Votes - 3, Average rating: 4.3 ( )

User manual Craftsman, model 911 041

Manafacture: Craftsman
File size: 750.4 kb
File name: ed602b23-9883-493f-a867-b8305e68fe40.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: C 983000-733 Save this manual for future reference 5-05 ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179 A WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. [] Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage. _1_ CAUTION: To reduce the risk of electric shock or damage to the charger and battery, charge only nickel-cadmium rechargeable batteries as specifically designated on your charger. Other types of batteries may burst, causing personal injury or damage. [] Do not use charger outdoors or expose to wet or damp conditions. Water entering charger will increase the risk of electric shock. [] Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. [] Do not abuse cord or charger. Never use the cord to carry the charger. Do not pull the charger cord rather than the plug when disconnecting from receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately. [] Make sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury, and damage to the cord, which could result in electric shock. [] Keep cord and charger from heat to prevent damage to housing or internal parts. [] Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic. [] Do not operate charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger replaced by an authorized serviceman. [] Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized serviceman for electrical check to determine if the charger is in good working order. [] Do not disassemble charger. Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. [] Unplug charger from outlet before attempting any maintenance or cleaning to reduce the risk of electric shock. [] Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It also will help prevent damage to the charger during a power surge. [] Risk of electric shock. Do not touch uninsulated portion of output connector or uninsulated battery terminal. [] Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury. Someofthefollowingsymbolsmaybeusedonthistool.Pleasestudythemandlearntheirmeaning.Properinterpretation ofthesesymbolswillallowyouto operatethetool betterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION @ Wet Conditions Alert Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand Read The Operator's Manual operator's manual before using this product. 0 Always wear safety goggles or safety glasses with side shields, Eye Protection or a full face shield when operating this product. A Safety Alert Precautions that involve your safety. PRODUCT SPECIFiCATiONS Charger Voltage ...................................................................................................................................... 7.2 Volt -24 Volt DC Charger Input ....................................................................................................................................... 120 V, 60 Hz, AC only Charge Rate .................................................................................................................................................................. 1 hour ...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category