Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
• • • The Quick View function is not available and the Quick View icon is dimmed in the Shortcut menu under the following conditions: If you have changed the mode after the recording or the camcorder is connected to a PC with the USB cable. If the camcorder has been turned off and on again after the recording. In the SMART AUTO mode. After you have used the Quick View function. • • • • Auto Exposure 16M9999 STBY SCENE0:00:00 [475Min] Basic recording RECORDING WITH EASE FOR BEGINNERS (SMART AUTO) User-friendly SMART AUTO optimises your camcorder to the recording conditions automatically, providing beginners with the best performance. Select the Record ( / ) mode by pressing the MODE button. .page 24 1. Press the SMART AUTO AUTO( ) button. • The SMART AUTO ( AUTO ) and Anti-Shake (HDIS) ( ) icons appear on the screen at the same time. 2. Adjust the subject on the LCD screen. 0:00:00 [475Min]STBY 9999 16MSMARTAUTO • The camcorder detects the subject and automatically selects a type of scene and adjusts the settings. • The icon for the detected scene appears on the LCD screen. : Appears when recording a landscape. : Appears when recording with a very bright background. : Appears when recording a night scene. : Appears when recording a portrait outdoors at night. : Appears when recording indoors. : Appears when recording a portrait. : Appears when recording a close-up. 4. To cancel SMART AUTO mode, press the SMART AUTO ( AUTO ) button again. • The SMART AUTO ( AUTO ) and Anti-Shake (HDIS) ( ) icons disappear from the screen. 0:00:00 [475Min]STBY 16M9999 • Buttons unavailable during SMART AUTO operation: MENU button / OK button/ etc. Most settings are automatically adjusted in SMART AUTO mode. To set or adjust functions on your own, release the SMART AUTO mode first. • SMART AUTO must be set before recording. • When there is no detected scene, the ( AUTO ) icon appears. • The camcorder may not detect the Portrait mode when recording a face, depending on the position of the face or brightness. • Depending on conditions such as lighting, shaking of the camcorder, or distance to the subject, the camcorder may detect the image you see on the LCD screen as a different scene type each time you apply Smart Auto. 3. Press the Recording start/stop button or PHOTO button. .pages 35~36 Basic recording ZOOMING Use the zoom function for close-up or wide-angle recording. This camcorder allows you to record using 52x optical power zoom, 65x Intelli-zoom and 2200x digital zoom. To zoom in To zoom out Slide the Zoom lever towards T (telephoto). (Or press the Control (Up) button on the LCD panel.) • The distant subject is gradually magnified. • The highest optical zoom magnification ratio is 52x. Slide the Zoom lever towards W (wide-angle). (Or press the Control (Down) button on the LCD panel.) • The subject gets smaller and further away. • The smallest optical zoom ratio is the subject’s original size when zoomed- out. W: Wide-angle T: Telephoto 0:00:00 [475Min]STBY 16M9999 • Zoom magnification over 65x is done through digital image processing, and is therefore called digital zoom. Digital zooming is possible up to 2200x. Set “ Zoom Type” to “Digital Zoom.” .page 62 • To maintain sharp focus, the minimum possible distance between the camcorder and subject is about 1cm (about 0.39 inch) for wide-angle and 1m (about 39.4 inches) for telephoto. • Optical zoom preserves image quality, but the image quality may suffer when you use digital zoom. • Fast zooming or zooming in a subject that is a good distance away may cause the camcorder to focus slowly. If this occurs, use “Manual Focus.” .page 56 • We recommend you use Anti-Shake (HDIS) for handheld recording when the subject is zoomed in and enlarged. • Frequent use of the zoom function consumes more power. • If you zoom when recording, the camcorder may record the sound of the zoom lever or zoom button operating. • When you use the zoom function, you can decrease its speed by slowly moving the Zoom (T/W) lever. Moving the lever quickly increases the zoom speed. However, you cannnot use the Zoom (T/W) button on the display to adjust the zoom speed. 9 99 Basic playback 40 You can view recorded videos and photos in thumbnail index view and play them in various ways. In the thumbnail index view, you can directly select and display a desired image without using fast forwarding and rewinding. This camcorder provides one combined video and photo record mode. You can easily record videos or photos in the same mode without having to change it. CHANGING THE PLAYBACK MODE Pressing the MODE button changes the operation mode to Record ( / ) and Play ( ) mode in turn. The recorded videos or photos are displayed in thumbnail index view. Depending on the record mode, recordings are stored in videos or photos thumbnail index view, respectively. When switching to Play mode after recording a video, the videos thumbnail index view appears. When switching to Play mode after recording a photo, the photos ...
Other models in this manual:Cameras - SMX-F500BP (11.76 mb)
Cameras - SMX-F500RP (11.76 mb)
Cameras - SMX-F500SP (11.76 mb)
Cameras - SMX-F500XP (11.76 mb)