Votes - 2, Average rating: 3 ( )

Manafacture: Amana File size: 572.21 kb File name: 805ddd46-f8d7-4856-87ae-b44892281249.pdf Language of manual:

The filter should be placed behind the grill before the cabinet is turned on. 0 1. The cover can be opened by simultaneously pressing the lever on the right of grill (1) and pulling the cover outward (2). 2. The carbon filter is then mounted in the slot found in the back of the cover (3). 1 The filter should be handled carefully so fragments don.t loosen from the surface. Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. 1 WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. Important The wires in the mains lead are coloured in accordance with the following code: Green Green and Yellow Earth & Yellow Blue Neutral Brown Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentified in the terminals Blue of your plug, proceed as follows: 1. The wire coloured green and yellow must be connected to the terminal marked with the letter Cord Clamp “E“ or by the earth symbol or coloured green and yellow. 2. The wire coloured blue must be connected to the terminal “N“ or coloured black. 3. The wire coloured brown must be connected to the terminal marked “L“ or coloured red. 4. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheet. 1 Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely. Brown 818 35 69-02/2 Description of the Appliance View of the appliance a Control panel a Butter and cheese compartment with lid a Door storage compartments a Bottle compartment a Salad bin c Shelves e Quick chill shelf e Filter housing e Bottle and can holder e Bottle rack i Rating plate 818 35 69-02/2 Description of the Appliance Control Panel 1 ON/OFF button 2 Button for adjusting the temperature (for warmer temperatures) 3 Temperature display 4 Button for adjusting the temperature (for colder temperatures) 5 COOLMATIC indicator light (yellow) 6 COOLMATIC button 7 Warning indicator light (red) 8 ALARM OFF button (see „Control- and Information Systems“) Buttons for Adjusting the Temperature The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. • The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER). • Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. • If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature. DESIRED temperature means: The temperature that is required in the freezer compartment, this can be adjusted to the temperatures shown in the display. The DESIRED temperature is indicated by flashing numbers. ACTUAL temperature means: The temperature display indicates the temperature that is currently present in the freezer compartment. The ACTUAL temperature is indicated with illuminated numbers. 818 35 69-02/2 Description of the Appliance Temperature Display The temperature display can indicate several pieces of information. • During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed. • When the temperature is being adjusted a flashing display indicates the fridge compartment temperature currently set (DESIRED temperature). • If there is a fault in the appliance the temperature display shows a square in the temperature display for the fridge. COOLMATIC button The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e.g. drinks and salads for a party. 0 1. The COOLMATIC function is switched on by pressing the COOLMATIC button. The yellow light illuminates. The COOLMATIC function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The COOLMATIC function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid. The temperature display shows the ACTUAL refrigerator temperature. 2. The COOLMATIC function can be ended manually at any time by pressing the COOLMATIC button again. The yellow light goes out. Important! Once the COOLMATIC function has been switched on the DESIRED temperature that w...

Download now

Please, enter two numbers from picture: