|
manual abstract
3. Loosen and remove six screws that secure spotlight housing. 4. Lift up and set aside the right side of the housing. 5. Remove wire spring and carefully pull out old bulb from the terminal. 6. Replace with a new H3 type, 12 volt, 100 watt bulb, available from an electrical supplyhouse or from Black & Decker (refer to the Service Information section). 7. Reverse the above procedure to re-assemble the spotlight. Note: When handling a new halogen bulb, do not touch the glass portion of the bulb. Natural oils from your hands can cause the bulb to fail. If necessary, clean the bulb with alcohol or a liquid window cleaner. Fuse Replacement (12 Volt DC Plug) If the inverter is overloaded, and the Power/Fault LED is not lit, the internal 8 amp fusemay be blown. 1. Unscrew the flange of the DC plug (counterc l o c k w i s e ) . 2. Remove the end contact, flange and fuse. 3. Inspect the fuse to see if it is good or blown. 4. Replace with a new 8 amp fuse, if needed. 5. Carefully reassemble the fuse, end contact and flange. Do not overtighten the flange( c l o c k w i s e ) . 5 CSL100MV ManualEN 062007.qxp 9/26/08 11:22 AM Page 6 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1 - 8 0 0 - 5 4 4 - 6 9 8 6 . WA R N I N G : The use of any accessory not recommended for use with this tool could be h a z a r d o u s . Service Information All Black & Decker Service Centers are staffed with trained personnel to provide customerswith efficient and reliable power tool service. Whether you need technical advice, repair, orgenuine factory replacement parts, contact the Black & Decker location nearest you. To findyour local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visit FULL ONE-YEAR HOME USE WARRANTY Black & Decker (U.S.) Inc. warrants this product for one year against any defects in materialor workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first, which will result in exchanges only, is to return the product to the retailer fromwhom it was purchased (provided that the store is a participating retailer). Returns should bemade within the time period of the retailer’s policy for exchanges (usually 30 to 90 days afterthe sale). Proof of purchase may be required. Please check with the retailer for their specificreturn policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to a Black & Decker owned orauthorized Service Center for repair or replacement at our option. Proof of purchase may berequired. Black & Decker owned and authorized Service Centers are listed under "To o l s Electric" in the yellow pages of the phone directory and on our websitew w w. b l a c k a n d d e c k e r. c o m . This warranty does not apply to accessories. This warranty gives you specific legal rightsand you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Serv i c eC e n t e r. This product is not intended for commercial use. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement. SPECIFICATIONS Spotlight Bulb: H3, 12 volt, 100 watt DC Plug Fuse: 8 amp, 250...
Other models in this manual:Work and Flash Light - 000 (569.22 kb)
Work and Flash Light - 1 (569.22 kb)
Work and Flash Light - SPORTSPOT 90519934 (569.22 kb)