Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 32   File size: 858 kb   Manafacture: Delta  
Category: Air Cleaners
@name@name@name

Thread a 5/16-18 flange nut (B) Fig. 3, on a 5/16-18 x 1-1/2" eye bolt (C). 2. Thread the eye-bolt (C) Fig. 3 in the hole (D). NOTE: Tighten the eye-bolts at least eight complete turns. 3. Tighten the flange nut (B) Fig. 3 against the air cleaner. 4. Repeat this process for the remaining hole in the top of the air cleaner (Fig. 4). This tool weighs approximately 40 pounds. Make certain the unit is securely supported when mounting it to a ceiling or overhead support. Never secure the air cleaner

downloaded: 29   File size: 331 kb   Manafacture: Delta  
Category: Air Cleaners
@name

USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by Delta may cause hazards or risk of injury to persons. 17. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in “OFF” position before plugging in power cord. In the event of a power failure, move switch to the “OFF” position. 2 18. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. 19. CHECK DAMAGED PARTS. Before further use of th

downloaded: 1   File size: 258 kb   Manafacture: Delta  
Category: Air Cleaners
@name

The air cleaner cabinet has convenient lifting handles located on either side (one of which is shown at (A) Fig. 4). To avoid damage to the air filters, carry the air cleaner with the filters positioned away from your body. A A Fig. 3 Fig.4 6 MOUNTING THE AIR CLEANER TO THE CEILING OR OVERHEAD SUPPORT This unit weighs approximately 60 pounds. When mounting overhead, be certain that the unit issecurely fastened and supported. 1. Locate the four 1" eye bolts and the four 1/4-20 flange nuts supplie





Category