Login:
Votes - 3, Average rating: 5 ( )

User manual 3M, model FAP02

Manafacture: 3M
File size: 410.77 kb
File name: cd4022fb-5a11-4cac-89f9-eabcf6d91bb7.pdf
Language of manual:enesfr
Free link for this manual available at the bottom of the page



manual abstract


Changer le filtre apres au moins 90 jours d’utilisation continue ou avant selon les conditions d’utilisation dans la maison. • Une inspection periodique du filtre pour detecter tout dommage ou toute obstruction est fortement recommandee. • Tout en maintenant le purificateur en place avec une main, ouvrir le couvercle avant avec l’autre main en saisissant et en tirant doucement le couvercle vers soi. • Retirer le couvercle et le conserver. • Pour retirer le filtre use, placer les doigts dans les rainures en haut du filtre et appuyer doucement sur le cadre du filtre pour le degager du rebord de retenue superieur. Sortir ensuite le filtre use de l’appareil. • Jetez le filtre use conformement a la reglementation en vigueur. • Pour regler de nouveau la minuterie, pressez le bouton (CHANGEMENT DU FILTRE) pendant 3 secondes. Un temoin rouge s’allume. Avant de s’eteindre, celui-ci clignote rapidement pendant que l’on maintient le bouton enfonce. La minuterie est maintenant reinitialisee. Pour reinitialiser la minuterie du filtre, l’appareil doit etre branche. 32 Retrait du filtre 5 Cleaning & Resetting the Filter Timer Cleaning: • Turn the Air Purifier off and unplug it before cleaning. • The outside of the Air Purifier can be cleaned with a soft, clean dampened cloth. • The filtered air outlet on the top of the unit can be cleaned of dust with a small, soft brush. • If you wish to clean the inside of the unit, please only use a dry, soft cloth to wipe it down. Resetting the Filter Timer: • To remind users to change the filter every 90 days, a countdown timer is installed. • The reset button is located behind the filter. • When the filter is about 80% used, a yellow light will illuminate as a reminder to purchase a replacement filter. • When the filter needs to be changed, the yellow light will turn red. Replace the filter immediately by following the instructions in the Filter Replacement section. • To reset the filter timer, hold down the FILTER CHANGE button for three seconds. A red light comes on. Before it disappears, the light will start flashing quickly as you continue to hold the button. The timer is now reset. To reset the filter timer, the device must be plugged in. 5 Cleaning & Resetting the Filter Timer Cleaning: • Turn the Air Purifier off and unplug it before cleaning. • The outside of the Air Purifier can be cleaned with a soft, clean dampened cloth. • The filtered air outlet on the top of the unit can be cleaned of dust with a small, soft brush. • If you wish to clean the inside of the unit, please only use a dry, soft cloth to wipe it down. Resetting the Filter Timer: • To remind users to change the filter every 90 days, a countdown timer is installed. • The reset button is located behind the filter. • When the filter is about 80% used, a yellow light will illuminate as a reminder to purchase a replacement filter. • When the filter needs to be changed, the yellow light will turn red. Replace the filter immediately by following the instru...

Other models in this manual:
Air Cleaners - FAP02 (410.77 kb)
Air Cleaners - FAP03 (410.77 kb)
Air Cleaners - FAP03 (410.77 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category