Votes - 1, Average rating: 4 ( )

Manafacture: AllerAir File size: 410.77 kb File name: Language of manual:

• If you wish to clean the inside of the unit, please only use a dry, soft cloth to wipe it down. Resetting the Filter Timer: • To remind users to change the filter every 90 days, a countdown timer is installed. • The reset button is located behind the filter. • When the filter is about 80% used, a yellow light will illuminate as a reminder to purchase a replacement filter. • When the filter needs to be changed, the yellow light will turn red. Replace the filter immediately by following the instructions in the Filter Replacement section. • To reset the filter timer, hold down the FILTER CHANGE button for three seconds. A red light comes on. Before it disappears, the light will start flashing quickly as you continue to hold the button. The timer is now reset. To reset the filter timer, the device must be plugged in. 6 or red light may stay lit depending on the filter condition. • If the device is operating on a speed other than High, you must change the fan speed to High to conduct the filter life diagonostics. 6 or red light may stay lit depending on the filter condition. • If the device is operating on a speed other than High, you must change the fan speed to High to conduct the filter life diagonostics. Air Purifier Use WarninG • Read and understand the operating manual before using the Air Purifier. Turning the Air Purifier On/Off: • Be sure the Air Purifier is properly plugged into a 120V AC outlet. • A green light will be illuminated with variable intensity on the control knob. The device does not filter air in this position. Adjusting the Fan Speed: • Once the unit is turned on, the fan speed can be adjusted to one of three settings. • From the OFF position, turn the control knob clockwise (CW) to the next position. A single green light will be circulating in the center of the knob. The device will be operating at Low Speed. • The second turn CW is Medium Speed. Two opposing green lights will be circulating. • The next position is High Speed, with three green lights circulating in the center of the knob. Filter Life Diagnostics: • At High Speed, the Filter Life Analyzer will perform diagnostics automatically. Yellow, green, and red lights in the center of the control knob will light in alternating order for 10 seconds. After filter life diagnostics are completed, only one light will remain on. • A green light means that the filter is functioning properly and does not need to be replaced. A yellow light indicates about 80% of the filter has been used, a red light indicates the filter needs replacement. • After 30 seconds of illumination, the green light will disappear, while a yellow Fonctionnement du purificateur d’air Mise en marche et arret du purificateur d’air une piece : • Le purificateur d’air doit etre branche correctement dans une prise de 120 V.c.a. (marche/arret) du purificateur d’air pour • Appuyez sur le bouton mettre l’appareil en marche. • Le dernier mode de fonctionnement programme est automatiquement memorise par l’appareil,...

Download now

Please, enter two numbers from picture: