Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Inlet Grill B. Washable Foam Pre-Filter C. HEPA/Carbon Filter D. Filtered Air Outlet BAP422 E. Filter Indicator Light F. Reset Button G. Ionizer Light H. Ionizer Control I. Speed Control J. Power Light BAP422IUK04EM1 Visual.qxd 3/12/04 3:12 AM U.K. and IRELAND PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS. With proper care and use, this Bionaire™ air purifier will give you fresh, clean air for many years. NOTE: Before reading these instructions, please view the corresponding illustrations. DESCRIPTIONS (SEE FIG 1/4) A. Inlet Grill B. Washable Foam Pre-Filter C. HEPA/Carbon Filter D. Filtered Air Outlet E. Filter Indicator Light F. Reset Button G. Ionizer Light H. Ionizer Control I. Speed Control J. Power Light SAFETY PRECAUTION Carefully read and retain all instructions before using the air purifier. •To avoid fire or shock hazard, check that the voltage on the product corresponds to your electricity supply and plug directly into an electrical outlet. •To avoid fire hazard, never put the cord under rugs, or near any heat source. • Carefully discard any plastic wrapping that was used for the packaging. • Do not use the air purifier outside. • Do not place the unit near any heat source or in direct sunlight. • Always unplug the air purifier before removing the grill, changing the filters, cleaning the air purifier or whenever it is not in use. • Do not use in or around water or any other liquids. Do not attempt to wash the unit under running water. • Use appliance only for intended household use as described in this manual. • Ensure that all air openings are not restricted or covered in any way. • Do not place anything on top of the unit. • Never insert any object into any openings. • Do not use the air purifier if any part or damaged in any way. • Do not attempt to repair or adjust functions of this unit. If the return to the place of purchase helpline number on the 2 Page 7 • If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard. • The air purifier contains no user serviceable parts and should the product suffer damage or breakdown it must be returned to the manufacturer or its service agent. • Should the air purifier stop working, first check the fuse in the plug (UK only) or fuse/circuit breaker at the distribution board is operating, before contacting the manufacturer or service agent. HOW THE AIR PURIFIER WORKS Dirty, dust laden air is drawn through the back of the air purifier and through the multi-stage filtration system. 1. The carbon filter will help clear odours making the air cleaner and fresher. 2. The HEPA filter entraps 99% of all smaller visible and non-visible particles down to 2 microns in size. PRODUCT FEATURES Filter Life Indicator Your air purifier has an indicator light that illuminates when its time to change the filters. Ioniser Your Bionaire™ Air Purifier has an independently controlled ioniser, which when turned on, releases negative ions into the outgoing filtered air. Ions are tiny particles that carry either a positive or negative charge. These ions exist naturally all around us in the air, water and ground. Both positive and negative ions are colourless, odourless and completely harmless. Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles, such as dust, pollen, smoke and pet dander to form larger particles that are then more readily captured by the filter system, or they may be attracted to positively charged surfaces like walls or floors. You may also note, after extended use, that dust may have collected around the grills or front panel. This is from the ionisation effect caused by the negative ions exiting from the air outlet.This does not come from the air output, but is drawn out of the uncleaned air going past the This is additional evidence of the air effectiveness of negative ions. The dust can be easily removed with a clean, dampened soft brush. NOTE: it is important to change the filter at recommended intervals. in conjunction with dirty particles exiting the air purifier and being attracted to walls, carpets, furniture and other household objects. These dirty particles may prove very difficult to remove. PRE-OPERATING INSTRUCTIONS 1. After removing the unit from the box, remove the plastic covering from the unit. 2. Select a firm level place where there are no obstructions to the air inlet (front grill) or filtered air outlet. 3. Remove the inlet grill by pulling the grill towards you. 4. Remove both HEPA filters by gripping on both sides and pulling forward. 5. Remove protective plastic bag from each filter cartridge. The filter clip can only be attached to the hang tabs on the filter one way (see fig 3). The filter clip should easily slide onto the filter hang tabs. Do not use force whilst attaching the filte...