Votes - 3, Average rating: 4 ( )

Manafacture: AllerAir File size: 11.7 mb File name: Language of manual:

Cut the nylon tie wrap that was holding the UV light bulb in place during shipping 7B Nylon wrap 4 pin socket TO REPLACE UV BULB AND BALLAST TO REPLACE THE HEPA FILTER STEP 1 Turn power off and Unplug the unit. Lay unit up-side down. STEP 2 Remove all four screws with a screwdriver. STEP 3 Gently grasp wheels. STEP 4 Remove base by gently pulling on the wheels. STEP 5 First remove the Carbon filter by placing thumbs on the inner side of the filter. Then pull up gently to remove filter. To refill the Carbon Canister without changing the HEPA filter go to STEP 7 on page 5. STEP 6 Remove the HEPA filter by placing thumbs on the inner side of the filter and grip the filter. Step 1 Turn power off Lay unit up-sidedown. With screw driver remove 4 screws. Gently grasp wheels. Remove lit by pulling slightly on wheels Removing Filters Remove the filter(s) depending on your model Carbon Filters HEPA Filters Step 2 Step 3 Step 4 Step 5 Step 6 Remove the three screws that hold in the filter end plate and remove Step 8 Place the new bulb in the holder and check that the bulb is horizontal and not touching anything before tightening the nut. Step 9 After securing the wing nut, replace the 4 prong connector which only connects one-way. "Notice the prongs are wider one way than the other" 4 pin socket 7A Step 7-10 W Lamp A. Unplug the 4 pin socket from the UV light bulb. B. Loosen the wing nut that holds the UV light bulb in place and remove bulb 7B Wing Nut 7A Step 7 -20W Lamp B. Unplug the 4 pin socket from the UV light bulb A. Cut the nylon tie wrap that was holding the UV light bulb in place during shipping 7B Nylon wrap 4 pin socket HEPA filter: 3 to 5 years depending on use. HEPA Filter Order Guide Models 4000 5000 6000 8000 Exec, Vocarb A4FH0411 A5FH0411 A6FH0411 A8FH0411 MCS A4FH0420 A5FH0420 A6FH0420 *Please use the above part numbers when ordering your replacement parts Notes: Replace the filter end plate making sure the aluminium side is down toward the side of the bulb. Replace the screws, filter(s) and bottom with the 4 screws 63 AllerAir Industries Inc. Toll free: 1 888 852 8247 / Fax: 1 877 688 2193 AllerAir Industries Inc.Toll free: 1 888 852 8247 / Fax: 1 877 688 2193 ALLERAIR'S AIR PURIFICATION SYSTEM TO BEGIN USING THE AIR PURIFIER ALLERAIR'S AIR PURIFICATION SYSTEM TO BEGIN USING THE AIR PURIFIER Wipe the unit with a damp cloth. Plug the unit into a grounded 110 outlet. Turn the unit on at TURBO and let it run for a moment. Place the unit in the desired area and set at HIGH for regular daytime use and at LOW for overnight. The most effective way to use the air purifier is to run it on low TO REPLACE OR CLEAN THE PRE FILTER STEP A Turn off the unit. Unplug the unit. Gently tilt over the unit. STEP B Remove the pre-filter gently to avoid disturbing the dust on it. Either Vacuum the pre -filter STEP C Replace the new or cleaned pre-filter by gently pressing against inner carbon filter. Gently return the unit to the upright position. on both sides and replace. Or Place the old pre-filter in a garbage bag for disposal. Pre -filter: Vacuumevery1or2months.Replacewhennecessary. Warning Before removing the top or bottom off the unit for any reason, unplug the unit. Do not allow any object to be stuck or paked into any opening of the unit. (i.e. louvers or control knob.) Prefilters Order Guide* Models Prefilters 4000 5000 6000 8000 Notes Exec, Vocarb Poly Prefilters A4FMP006 A5FMP009 A6FMP012 A8FMP008 packs of 4 or 8 DS Models Tacky Prefilters A4FMPS06 A5FMPS09 A6FMPS12 packs of 10 MCS Models Cotton Prefilters A4FCP016 A5FCP019 A6FCP022 packs of 6 *Please use the above part numbers when ordering your replacement parts LASER TESTED TRUE HEPA HEPA (Hight Efficiency Particulate Arrestance) filters were deve...

Download now

Please, enter two numbers from picture: