Votes - 4, Average rating: 4.3 ( )

Manafacture: AllerAir File size: 11.7 mb File name: Language of manual:

oll free: 1-888-852-8247 / Fax: 1-877-688-2193 AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 STEP 7 Pull back pre-filter slightly, remove screws from top of filter. STEP 8 Remove carbon filter lid. STEP 9 Pour out old bulk carbon until totally empty. STEP 10 Pour the new bulk carbon into the carbon canister. While pouring in the new carbon, tap the side of the carbon canister with a rubber mallet to compact the carbon STEP 12 New bulk carbon should be filled flush with the top of the canister. STEP 13 Put lid back on and align the lid holes with pre-drilled holes on the canister. STEP 14 Press down on the lid until securely tight. STEP 15 Put back the screws in the pre-drilled holes. STEP 11 Use a custom refill funnel from AllerAir. Save time and spillage and ensure an even distribution of carbon. Available from AllerAir Call Toll free 1-888-852-8247 4 5 Empty Carbon Canisters Order Guide* Models 4000 5000 6000 8000 Notes 2" Canister** A4FC0501 A5FC0501 A6FC0501 A8FC0501 Exec and Vocarb; MCS models 2.5" Canister** A4FC1501 A5FC1501 A6FC1501 A8FC1501 Exec and Vocarb models D Models A4FC0503 A5FC0503 A6FC0503 A8FC0503 DX Models A4FC1503 A5FC1503 A6FC1503 A8FC1503 *Please use the above part numbers when ordering your replacement parts. Please consult the Bulk Carbon Order Guide **Please refer to your carbon filter depth when ordering a replacement Bulk Carbon Order Guide* Models 4000 5000 6000 8000 Notes Exec Mix AM000911 AM000911 AM000911 AM000911 Vocarb Mix AM000912 AM000912 AM000912 AM000912 Tobacco Smoke MixAM000901 AM000901 AM000901 AM000901 MCS Mix AM000912 AM000912 AM000912 AM000912 Special Blend Mix *Please use the above part numbers when ordering your replacement parts please call TO REPLACE UV BULB AND BALLAST TO REPLACE THE HEPA FILTER STEP 1 Turn power off and Unplug the unit. Lay unit up-side down. STEP 2 Remove all four screws with a screwdriver. STEP 3 Gently grasp wheels. STEP 4 Remove base by gently pulling on the wheels. STEP 5 First remove the Carbon filter by placing thumbs on the inner side of the filter. Then pull up gently to remove filter. To refill the Carbon Canister without changing the HEPA filter go to STEP 7 on page 5. STEP 6 Remove the HEPA filter by placing thumbs on the inner side of the filter and grip the filter. Step 1 Turn power off Lay unit up-sidedown. With screw driver remove 4 screws. Gently grasp wheels. Remove lit by pulling slightly on wheels Removing Filters Remove the filter(s) depending on your model Carbon Filters HEPA Filters Step 2 Step 3 Step 4 Step 5 Step 6 Remove the three screws that hold in the filter end plate and remove Step 8 Place the new bulb in the holder and check that the bulb is horizontal and not touching anything before tightening the nut. Step 9 After securing the wing nut, replace the 4 prong connector which only connects one-way. "Notice the prongs are wider one way than the other" 4 pin socket 7A Step 7-10 W Lamp A. Unplug the 4 pin socket from the UV light bulb. B. Loosen the wing nut that holds the UV light bulb in place and remove bulb 7B Wing Nut 7A Step 7 -20W Lamp B. Unplug the 4 pin socket from the UV light bulb A. Cut the nylon tie wrap that was holding the UV light bulb in place during shipping 7B Nylon wrap 4 pin socket TO REPLACE UV BULB AND BALLAST TO REPLACE THE HEPA FILTER STEP 1 Turn power off and Unplug the unit. Lay unit up-side down. STEP 2 Remove all four screws with a screwdriver. STEP 3 Gently grasp wheels. STEP 4 Remove base by gently pulling on the wheels. STEP 5 First remove the Carbon filter by placing thumbs on the inner side of the filter. Then pull up gently to remove filter. To refill the Carbon Canister without changing the HEPA filter go to STEP 7 on page 5. STEP 6 Remove th...

Download now

Please, enter two numbers from picture: