Votes - 1, Average rating: 3 ( )

Manafacture: Bock s File size: 201.51 kb File name: 3ec56902-fdd2-4021-aecb-aa83682bbe0d.pdf Language of manual:

Please keep for future reference. Waranty, registration card & parts list included. INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS OIL-FIRED WATER HEATERS 72E • 73E • 190E • 241E • 361E • 541E WARNING: Improper installation, adjustment, alteration, service or maintenance can cause serious injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer or service agency. WARNING: If the information in these instructions is not followed exactly, fire or explosion may result and can cause property damage, personal injury or death. DO NOT INSTALL THE WATER HEATER ON COMBUSTIBLE FLOORING. Install in accordance with all local codes. In the absence of local codes, refer to NFPA 31 or ANSI Z21.10.1, or contact Bock Water Heaters with questions concerning proper flooring materials. Minimum clearance to combustible construction is: SIDES 6"; BACK 6"; FRONT 24". The installation of this water heater must conform with local codes and ordinances. In the absence of local codes, the installation must comply with the National Fire Protection Association (NFPA 31) Code. WARNING: The recommended temperature for normal residential use is 120oF. The dial on the aquastat does not always reflect the outcoming water temperature, which could occasionally exceed 120oF. The variation in outcoming temperature could be based on factors including but not limited to usage patterns and type of installation. Test your water at the tap nearest to the water heater. WARNING: Hotter water increases the risk of scald injury. Before changing the temperature setting, read the instruction manual. Temperatures at which injury occurs vary with the individual’s age and length of exposure. The slower reaction times of children, elderly and physically or mentally impaired persons increases the scalding hazard to them. It is recommended lower water temperatures be used where these situations exist. To lower water temperature use point-of-use temperature limiting devices. WARNING: Flammable vapors may be drawn to this water heater from other areas of the structure by air currents. Do not store or use any flammable liquids in the vicinity of this heater. WARNING: Water heater blankets may restrict air flow to the heater and cause fire, asphyxiation, personal injury or death. WARNING: Hydrogen gas can be produced in a hot water system that has not been used for an extended period–generally, two weeks or longer. To prevent possible injury under this situation, we recommend that a hot water faucet be wide open for several minutes before you use ANY electrical appliance that is connected to the hot water system. If hydrogen is present, an unusual sound – such as air escaping – will come from the open faucet as the hot water begins to flow. Hydrogen gas is extremely flammable – there must be no open flame near this open faucet. Bock Water Heaters, Inc. 110 S. Dickinson St. • P.O. Box 8632 • Madison, WI 53708-8632 Phone: 608/257-2225 • Fax: 608/257-5304 • Leave ample room for servicing when the water heater is installed – do not block access to the burner, inspection door, handholes or controls. Leave room to pipe the unit and connect the fuel and electricity. – 2 – PERFORMANCE SPECIFICATIONS AND ROUGHING-IN DIMENSIONS CAUTION: The recommended water temperature setting for normal residential use is 120OF. 73E, 190E, 241E, 361E 72E SIZES AND CAPACITIES (shipping weights are complete assembly, including burners and controls) MODEL STORAGE CAPACITY 541E HOTOUTLET * COLDINLETDRAINALT INLET/ RETURN * * 541E CARLIN 201CRD/98285000B541E 4.00X70OB 130 PSI WAYNE EH/371-028 72E 67 GAL. 199,000 1.50 GPH 120V 60HZ 1/7 HP 550 LBS. –– 73E 67 GAL. 190E 113 GAL. 190,000 1.35 GPH 120V 60HZ 1/7 HP 690 LBS. –– 241E 109 GAL. 361E 91 GAL. 415,000 3.00 GPH 120V 60HZ 1/4 HP 1105 LBS. 1125 LBS. 541E 83 GAL. BURNER SPECIFICATIONS MODEL/OEM # NOZZLE PRESSURE 72E CARLIN EZ-2HP/9833222J72E 1.25X70OB 150 PSI WAYNE MSR/371-019B 1.50X80OB 100 PSI RIELLO R35.5/C8512221 1.25X60OB 150 PSI RIELLO 40F10/ 1.25X60OB 150 PSI 73E CARLIN EZ-2HP/9833222J73E 1.50X70OB 150 PSI WAYNE MSR/371-022B 1.75X80OB 100 PSI RIELLO 40F10/C8514109 1.50X60OB 150 PSI 190E WAYNE MSR/371-129B 1.35X70OB 100 PSI CARLIN EZ-1/9682811J190E 1.35X70OB 100 PSI BECKETT AF 1.35X70OB 100 PSI 241E CARLIN EZ-2HP/9833111J241E 1.65X70OB 150 PSI WAYNE 371-024B 2.0X80OB 100 PSI 361E CARLIN 201CRD/98285000B361E 2.50X70OB 150 PSI WAYNE EH/371-026 3.00X80OA 100 PSI 4.50X80OB 100 PSI BTUH FIRING STANDARD SHIPPING WEIGHT INPUT RATE VOLTAGE MOTOR STANDARD ASME 242,000 1.75 GPH 120V 60HZ 1/7 HP 550 LBS. –– 277,000 2.00 GPH 120V 60HZ 1/7 HP 925 LBS. 950 LBS. 623,000 4.50 GPH 120V 60HZ 1/4 HP 1330 LBS. 1340 LBS. MODEL 190E 361E 72E & 73E 58” 28” 20” 16” 8” 11/2”* 1” 3/4” 11/2” 241E 67” 311/2” 22” 19” 8” 2”* 1” 3/4” 2” E 6” 2”* 1” 3/4” 2” 9” 2”* 1” 3/4” 2” 541E 66” 34” 301/2” NA 10” 2”* 2”* 3/4” 2” ** Under drain valve on 72E & 73E only A B C 661/4”311/2”201/2” ...

Download now

Please, enter two numbers from picture: